rtl8139 NIC IRQ is 0 on m758lmr+ mainboard

[riskin at 263.net]

Hi!All,

My rtl8139 NIC IRQ is 0 on m758lmr+ mainboard.
I used getpir to get new irq_table.c,but the IRQ still is 0.
Who can tell me what should I do?
Thanks.



LinuxBIOS-1.0.0 Sat Feb 8 23:31:46 HKT 2003 starting...
Copying LinuxBIOS to ram.
POST: 0x39, TSC Lo: 3, Hi: 3
LinuxBIOS-1.0.0 Sat Feb 8 23:31:46 HKT 2003 booting...
POST: 0x40, TSC Lo: 55, Hi: 55
Finding PCI configuration type.
PCI: Using configuration type 1
POST: 0x5f, TSC Lo: 44912, Hi: 44912
handle_superio start, s 0000d240 nsuperio 1 s->super 0000e578
handle_superio Pass 0, check #0, s 0000d240 s->super 0000e578
handle_superio: Pass 0, Superio SiS 950
handle_superio  port 0x0, defaultport 0x2e
handle_superio  Using port 0x2e
handle_superio Pass 0, done #0
handle_superio done
Scanning PCI bus...PCI: pci_scan_bus for bus 0
POST: 0x24, TSC Lo: 0, Hi: 0
PCI: 00:00.0 [1039/0630]
PCI: 00:00.1 [1039/5513]
PCI: 00:01.0 [1039/0008]
PCI: 00:01.1 [1039/0900]
PCI: 00:01.2 [1039/7001]
PCI: 00:01.3 [1039/7001]
PCI: 00:01.4 [1039/7018]
PCI: 00:01.6 [1039/7013]
PCI: 00:02.0 [1039/0001]
PCI: 00:0d.0 [10ec/8139]
PCI: 00:0f.0 [13f6/0111]
PCI: 00:0f.1 [13f6/0211]
POST: 0x25, TSC Lo: -1, Hi: -1
PCI: pci_scan_bus for bus 1
POST: 0x24, TSC Lo: 0, Hi: 0
PCI: 01:00.0 [1039/6300]
POST: 0x25, TSC Lo: -1, Hi: -1
PCI: pci_scan_bus returning with max=01
POST: 0x55, TSC Lo: 40, Hi: 40
PCI: pci_scan_bus returning with max=01
POST: 0x55, TSC Lo: 40, Hi: 40
done
POST: 0x66, TSC Lo: 5, Hi: 5
POST: 0x70, TSC Lo: 60036, Hi: 60036
totalram: 126M
Initializing CPU #0
Updating microcode
microcode_info: sig = 0x00000686 pf=0x00000010 rev = 0x00000000
POST: 0x60, TSC Lo: 64, Hi: 64
Enabling cache...
Setting fixed MTRRs(0-88) type: UC
Setting fixed MTRRs(0-16) type: WB
DONE fixed MTRRs
Setting variable MTRR 0, base:    0MB, range:   64MB, type WB
Setting variable MTRR 1, base:   64MB, range:   32MB, type WB
Setting variable MTRR 2, base:   96MB, range:   16MB, type WB
Setting variable MTRR 3, base:  112MB, range:    8MB, type WB
Setting variable MTRR 4, base:  120MB, range:    4MB, type WB
Setting variable MTRR 5, base:  124MB, range:    2MB, type WB
DONE variable MTRRs
Clear out the extra MTRR's
call intel_enable_fixed_mtrr()
call intel_enable_var_mtrr()
Leave setup_mtrrs
POST: 0x6a, TSC Lo: 18, Hi: 18
done.

Max cpuid index    : 2
Vendor ID          : GenuineIntel
Processor Type     : 0x00
Processor Family   : 0x06
Processor Model    : 0x08
Processor Mask     : 0x00
Processor Stepping : 0x06
Feature flags      : 0x0383fbff

Cache/TLB descriptor values: 1 reads required
Desc 0x01 : Instr TLB: 4KB pages, 4-way set assoc, 32 entries
Desc 0x02 : Instr TLB: 4MB pages, fully assoc, 2 entries
Desc 0x03 : Data TLB: 4KB pages, 4-way set assoc, 64 entries
Desc 0x00 : null
Desc 0x00 : null
Desc 0x00 : null
Desc 0x00 : null
Desc 0x00 : null
Desc 0x00 : null
Desc 0x00 : null
Desc 0x00 : null
Desc 0x41 : L2 Unified cache: 128K bytes, 4-way set assoc, 32 byte line size
Desc 0x08 : Inst cache: 16K bytes, 4-way set assoc, 32 byte line size
Desc 0x04 : Data TLB: 4MB pages, 4-way set assoc, 8 entries
Desc 0x0c : Data cache: 16K bytes, 2-way or 4-way set assoc, 32 byte line size


POST: 0x92, TSC Lo: 1, Hi: 1

MTRR check
Fixed MTRRs   : Enabled
Variable MTRRs: Enabled

POST: 0x93, TSC Lo: 1, Hi: 1
Configuring L2 cache...CPU signature of 680 so no L2 cache configuration
Enable Cache
done.
Disabling local apic...done.
POST: 0x9b, TSC Lo: 6, Hi: 6
CPU #0 Initialized
POST: 0x75, TSC Lo: 0, Hi: 0
POST: 0x77, TSC Lo: 117, Hi: 117
Allocating PCI resources...
PCI: 00:0f.0 register 10(0000ff01), read-only ignoring it
PCI: 00:0f.1 register 10(0000ffc1), read-only ignoring it
PCI: 00:0f.0 register 10(0000ff01), read-only ignoring it
PCI: 00:0f.1 register 10(0000ffc1), read-only ignoring it
PCI: 00:0f.0 register 10(0000ff01), read-only ignoring it
PCI: 00:0f.1 register 10(0000ffc1), read-only ignoring it
PCI: 00:0f.0 register 10(0000ff01), read-only ignoring it
PCI: 00:0f.1 register 10(0000ffc1), read-only ignoring it
ASSIGN RESOURCES, bus 0
PCI: 00:00.0 10 <- [0xf8000000 - 0xfbffffff] mem
PCI: 00:00.1 10 <- [0x00003090 - 0x00003097] io
PCI: 00:00.1 14 <- [0x000030b0 - 0x000030b3] io
PCI: 00:00.1 18 <- [0x000030a0 - 0x000030a7] io
PCI: 00:00.1 1c <- [0x000030c0 - 0x000030c3] io
PCI: 00:00.1 20 <- [0x00003080 - 0x0000308f] io
PCI: 00:01.1 10 <- [0x00002000 - 0x000020ff] io
PCI: 00:01.1 14 <- [0xfc100000 - 0xfc100fff] mem
PCI: 00:01.2 10 <- [0xfc101000 - 0xfc101fff] mem
PCI: 00:01.3 10 <- [0xfc102000 - 0xfc102fff] mem
PCI: 00:01.4 10 <- [0x00002400 - 0x000024ff] io
PCI: 00:01.4 14 <- [0xfc103000 - 0xfc103fff] mem
PCI: 00:01.6 10 <- [0x00002800 - 0x000028ff] io
PCI: 00:01.6 14 <- [0x00003000 - 0x0000307f] io
PCI: 00:02.0 1c <- [0x00001000 - 0x00001fff] bus 1 io
PCI: 00:02.0 24 <- [0xf0000000 - 0xf7ffffff] bus 1 prefmem
PCI: 00:02.0 20 <- [0xfc000000 - 0xfc0fffff] bus 1 mem
ASSIGN RESOURCES, bus 1
PCI: 01:00.0 10 <- [0xf0000000 - 0xf7ffffff] prefmem
PCI: 01:00.0 14 <- [0xfc000000 - 0xfc01ffff] mem
PCI: 01:00.0 18 <- [0x00001000 - 0x0000107f] io
PCI: 00:0d.0 10 <- [0x00002c00 - 0x00002cff] io
PCI: 00:0d.0 14 <- [0xfc104000 - 0xfc1040ff] mem
Allocating VGA resource
done.
POST: 0x88, TSC Lo: 6, Hi: 6
Enabling PCI resourcess...PCI: 00:00.0 cmd <- 07
PCI: 00:00.1 cmd <- 01
PCI: 00:01.0 cmd <- 0c
PCI: 00:01.1 cmd <- 03
PCI: 00:01.2 cmd <- 02
PCI: 00:01.3 cmd <- 02
PCI: 00:01.4 cmd <- 03
PCI: 00:01.6 cmd <- 01
PCI: 00:02.0 cmd <- 07
PCI: 00:0d.0 cmd <- 03
PCI: 00:0f.0 cmd <- 80
PCI: 00:0f.1 cmd <- 00
PCI: 01:00.0 cmd <- 03
done.
Initializing PCI devices...
PCI devices initialized
POST: 0x89, TSC Lo: 24, Hi: 24
POST: 0x91, TSC Lo: 137, Hi: 137
POST: 0x92, TSC Lo: 251, Hi: 251
Enabled in SIS 503 regs 0x40 and 0x45
Now try to turn off shadow
device for SiS 630 is 0x12b6c
Shadow memory disabled in SiS 630
POST: 0x00, TSC Lo: 2, Hi: 2
POST: 0x04, TSC Lo: 2, Hi: 2
POST: 0x04, TSC Lo: 2, Hi: 2
POST: 0x04, TSC Lo: 2, Hi: 2
POST: 0x04, TSC Lo: 2, Hi: 2
POST: 0x04, TSC Lo: 2, Hi: 2
POST: 0x04, TSC Lo: 2, Hi: 2
POST: 0x04, TSC Lo: 2, Hi: 2
POST: 0x04, TSC Lo: 2, Hi: 2
POST: 0x04, TSC Lo: 2, Hi: 2
POST: 0x04, TSC Lo: 2, Hi: 2
POST: 0x04, TSC Lo: 2, Hi: 2
handle_superio start, s 0000d240 nsuperio 1 s->super 0000e578
handle_superio Pass 1, check #0, s 0000d240 s->super 0000e578
handle_superio: Pass 1, Superio SiS 950
handle_superio  port 0x2e, defaultport 0x2e
handle_superio  Using port 0x2e
handle_superio Pass 1, done #0
handle_superio done
PCCHIPS m758lmr+ (and similar)...Remapping IRQ on southbridge for OLD_KERNEL_HACK
Entering the initregs process
Southbridge fixup done for SIS 503
POST: 0xec, TSC Lo: 35, Hi: 35
handle_superio start, s 0000d240 nsuperio 1 s->super 0000e578
handle_superio Pass 2, check #0, s 0000d240 s->super 0000e578
handle_superio: Pass 2, Superio SiS 950
handle_superio  port 0x2e, defaultport 0x2e
handle_superio  Using port 0x2e
  Call finishup
handle_superio Pass 2, done #0
handle_superio done
POST: 0x9a, TSC Lo: 20, Hi: 20
Checking IRQ routing tables.../opt/cwlinux/freebios/src/arch/i386/lib/pirq_routing.c:    23:check_pirq_routing_table() - irq_routing_table located at: 0x0000ac80
done.
Copying IRQ routing tables to 0xf0000...done.
POST: 0x96, TSC Lo: 983168, Hi: 983168
Wrote linuxbios table at: 00000500 - 00000690  checksum 4dfd
Jumping to linuxbiosmain()...
POST: 0xed, TSC Lo: 30, Hi: 30

Welcome to start32, the open sourced starter.
This space will eventually hold more diagnostic information.

January 2000, James Hendricks, Dale Webster, and Ron Minnich.
Version 0.1

.........


........
Jumping to boot code
POST: 0xfe, TSC Lo: 21, Hi: 21
Linux version 2.2.14-5.0 (root at Grow) (gcc version egcs-2.91.66 19990314/Linux (egcs-1.1.2 release)) #42 Tue Jan 14 11:59:11 CST 2003
Ignoring bogus EBDA pointer 3FFF000
Detected 634784426 Hz processor.
Console: colour EGA 80x25
Calibrating delay loop... 634.06 BogoMIPS
Memory: 99624k/128000k available (1308k kernel code, 416k reserved, 1588k data, 64k init, 0k bigmem)
Dentry hash table entries: 262144 (order 9, 2048k)
Buffer cache hash table entries: 131072 (order 7, 512k)
Page cache hash table entries: 32768 (order 5, 128k)
VFS: Diskquotas version dquot_6.4.0 initialized
CPU: Intel Pentium III (Coppermine) stepping 06
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.35a (19990819) Richard Gooch (rgooch at atnf.csiro.au)
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Enabling I/O for device 00:78
PCI: Enabling I/O for device 00:79
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
TCP: Hash tables configured (ehash 131072 bhash 65536)
Linux IP multicast router 0.06 plus PIM-SM
Initializing RT netlink socket
Starting kswapd v 1.5 
Detected PS/2 Mouse Port.
Serial driver version 4.27 with MANY_PORTS<4>keyboard: Too many NACKs -- noisy kbd cable?
keyboard: Too many NACKs -- noisy kbd cable?
 MULTIPORT SHARE_IRQ enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
pty: 256 Unix98 ptys configured
apm: BIOS not found.
Real Time Clock Driver v1.09
RAM disk driver initialized:  16 RAM disks of 26000K size
SIS5513: IDE controller on PCI bus 00 dev 01
SIS5513: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x3080-0x3087, BIOS settings: hda:pio, hdb:pio
    ide1: BM-DMA at 0x3088-0x308f, BIOS settings: hdc:pio, hdd:pio
hd0: C/H/S=0/0/0 from BIOS ignored
hd0: C/H/S=0/0/0 from BIOS ignored
hd0: C/H/S=0/0/0 from BIOS ignored
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
md driver 0.90.0 MAX_MD_DEVS=256, MAX_REAL=12
raid5: measuring checksumming speed
raid5: MMX detected, trying high-speed MMX checksum routines
   pII_mmx   :  1474.470 MB/sec
   p5_mmx    :  1565.148 MB/sec
   8regs     :  1090.422 MB/sec
   32regs    :   619.887 MB/sec
using fastest function: p5_mmx (1565.148 MB/sec)
scsi : 0 hosts.
scsi : detected total.
md.c: sizeof(mdp_super_t) = 4096
Partition check:
RAMDISK: ext2 filesystem found at block 0
RAMDISK: Loading 25000 blocks [1 disk] into ram disk... done.
autodetecting RAID arrays
autorun ...
... autorun DONE.
VFS: Mounted root (ext2 filesystem).
Freeing unused kernel memory: 64k freed
fl: Flash disk driver for DiskOnChip
fl: DOC device(s) found: 1
 fla: fla1
fl: partition: 0: start_sect: 0, nr_sects: 6d90 Fl_blk_size[]: 36c8kb
fl: partition: 1: start_sect: 2, nr_sects: 6d7a Fl_blk_size[]: 36bdkb
fl: partition: 2: start_sect: 0, nr_sects: 0 Fl_blk_size[]: 0kb
fl: partition: 3: start_sect: 0, nr_sects: 0 Fl_blk_size[]: 0kb
 fla: fla1
sis900.c: v1.06.11  4/30/2002
eth0: SiS 900 PCI Fast Ethernet at 0xb000, IRQ 11, 00:e0:06:09:ff:ff.
eth0: SiS 900 Internal MII PHY transceiver found at address 1.
eth0: Using transceiver found at address 1 as default
  The PCI BIOS has not enabled the device at 0/88!  Updating PCI command 0003->0007.
rtl8139.c:v1.07 5/6/99 Donald Becker http://cesdis.gsfc.nasa.gov/linux/drivers/rtl8139.html
eth1: RealTek RTL8139 Fast Ethernet at 0x2c00, IRQ 0, 00:e0:4c:43:42:c5.
.......