EPIA PCI slot

[ron minnich]

On Fri, 13 Jun 2003, Andrew Ip wrote:

> > The reason I was not getting interrupts on devices in the pci slot on the
> > EPIA is because they were not set to be bus masters, so they would never
> > generate interrupts.  A quick write to the command register fixed the
> > problem.  Command register is being set to 0x02.  It should be set to
> > 0x06.  a 6 to 4.
> Thanks for the catch.  IIRC, I did have extra ethernet card working before.

PLEASE do not patch linuxbios to enable this.

thanks

ron