ADLO for EPIA

[hcyun at etri.re.kr]

I tested ADLO on EPIA but it failed on the first try. 

I grapped vgabios using your Makefile target and  modified loader.s to
enable 
shadow ram control registers of EPIA. 
However,  it hang around post code 0x96 and nothing is shown on the CRT. 

Do you have any idea what 0x96 post code means. 
Is it a bochs post code or vgabios postcode? 


> -----Original Message-----
> From: Adam Sulmicki [mailto:adam at cfar.umd.edu]
> Sent: Tuesday, March 11, 2003 4:13 AM
> To: hcyun at etri.re.kr
> Cc: linuxbios at clustermatic.org
> Subject: Re: ADLO for EPIA 
> 
> 
> > I'm trying to bring up VGA on EPIA board.
> > >From the list, EPIA board is supported and I've tested 
> with Angrew's image.
> > However, due to full support of VGA is necessary, I'm 
> trying to figure out
> > ADLO to run binary only
> > VGABIOS rom image.
> > Can I acomplish this with ADLO?. If yes, how much extra 
> work will be needed
> > you think?
> 
> I'm not familar with EPIA. Wasn't that the motherboard that 
> had all this
> video emulation code (whatever you would call it). what's the gfx card
> anyway?
> 
> anyway. if you can separate out the vga bios from rest of the 
> bios (and it
> can function standalone), then there's no reason why it would 
> not work.
> 
> as for "how much extra work" depends on what you want to use 
> it for. for
> example IDE code in bochs-bios could use some more work (last time I
> looked at it).
> 
> 
> -- 
> Adam Sulmicki
> http://www.eax.com 	The Supreme Headquarters of the 32 bit registers
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20030311/02a0ec52/attachment.html>