linuxbios on PPC (fwd)

[Ronald G. Minnich]

Greg Watson almost has it done. 

It required a few changes to linuxbios build procedures, but not many. It 
has small impact. 

ron

---------- Forwarded message ----------
Date: Mon, 10 Mar 2003 20:51:39 -0700
From: Greg Watson <gwatson at lanl.gov>
To: Ron Minnich <rminnich at lanl.gov>
Subject: linuxbios on PPC

Here's what I get so far (running from ram). Very close! The malloc 
error is because the jump to linuxbiosmain code is missing...

Greg

DINK32 [MPC7410] >>go 700100
bsp_init_memory...
i2c testing
Part Number: M4 64S0824DT1-L1L
Linuxbios release sandpoint (compiled Mar 10 2003)
Memory from 0x00000000 to 0x04000000
handle_superio start, nsuperio 1
handle_superio Pass 0, check #0, s 0070a234 s->super 0070a0dc
handle_superio: Pass 0, Superio NSC 87307
handle_superio  port 0x0, defaultport 0x3f8
handle_superio  Using port 0x3f8
handle_superio Pass 0, done #0
handle_superio done
Registered flash Am29LV800BB
Unknown flash ID: 0x60 0x00
Scanning PCI bus...PCI: pci_scan_bus for bus 0
POST: 0x24
PCI: 00:00.0 [1057/0004]
PCI: 00:0b.0 [10ad/0565]
POST: 0x25
PCI: pci_scan_bus returning with max=00
POST: 0x55
done
Allocating PCI resources...
PCI: 00:00.0 register 10(00000008), read-only ignoring it
ASSIGN RESOURCES, bus 0
PCI: 00:00.0 14 <- [0xfebff000 - 0xfebfffff] mem
ASSIGNED RESOURCES, bus 0
done.
Enabling PCI resourcess...PCI: 00:00.0 cmd <- 06
PCI: 00:0b.0 cmd <- 07
done.
Initializing PCI devices...
PCI devices initialized
Sandpoint BSP
PowerPC 7410 CPU, version 17.4
NVRAM size is 8191
Error! malloc: Free_mem_ptr >= free_mem_end_ptrPOST: 0xff