epia-m (600mhz) -- /dev/ttyS1

[Niki Waibel]

def sure 57600 is (currently) the max on /dev/ttyS0.
(but my setup is 115200).
i dont care much, but of course it should be fixed.

/dev/ttyS0 was at 115200 when i changed from the regular
bios to linuxbios. a soft reset was ok -- still 115200.
but after pressing the power switch the port was at
57600 max.

i have to check ttyS1...
(i am working with devfs so i might refer to tts/1 in furure...)

niki

On 18-Nov-2003 Dave Ashley wrote:
>>perfect!!!
> 
> Can you verify something: On my epia-m ttyS0 is 1/2 the baud rate it should
> be, so I can't get 115,200 baud, only 57,600. Can you verify if you can
> get 115,200 on both serial ports?
> 
> -Dave
> _______________________________________________
> Linuxbios mailing list
> Linuxbios at clustermatic.org
> http://www.clustermatic.org/mailman/listinfo/linuxbios

-- 
niki w. waibel - system administrator @ newlogic technologies ag