epia code.
ron minnich
rminnich at lanl.gov
Thu Oct 2 10:58:08 CEST 2003
Some errors crept in due to a commit I made this morning, if you get
compile errors try again.
status is IRQ table copies and verifies, but fails in linux:
via-rhine.c:v1.10-LK1.1.19 July-12-2003 Written by Donald Becker
http://www.scyld.com/network/via-rhine.html
PCI: No IRQ known for iinterrupt pin Af device 00:12.0. Please try using
pci=biosirq.
eth0: VIA VT6102 Rhine-II at 0x1800, 00:40:63:ca:eb:c5, IRQ 0.
eth0: MII PHY found at addresis 1, status 0x7advertising 05e1 Link 0000.
looks like the table is bad ...
Checking IRQ routing tables...
Inconsistent IRQ routing table size
/home/rminnich/src/bios/freebios2/src/arch/i386/boot/pirq_routing.c:
29:check_pirq_routing_table() - irq_routing_table located at: 0x00009ca0
/home/rminnich/src/bios/freebios2/src/arch/i386/boot/pirq_routing.c:
44:check_pirq_routing_table() - Interrupt Routing Table not valid
Copying IRQ routing tables to 0xf0000...done.
Verifing priq routing tables copy at 0xf0000...succeed
Wrote linuxbios table at: 00000500 - 00000af0 checksum c456
oops. Try to fix now.
ron
More information about the coreboot
mailing list