SC1200 and framebuffer under 2.4.22 without having vga-bios or VSA-bios is up
Brian G. Rhodes
bgr at gw.linespeed.net
Tue Oct 14 20:05:01 CEST 2003
There is support for IDE DMA on the geode in 2.4.19+. National also has a
patch for 2.4.17 which I believe I have tried on 2.4.17-2.4.21. Though
with the national driver you cannot do DMA with the 66mhz bus speed.
Brian G Rhodes
bgr at linespeed.net
brhodes at visualcircuits.com
On Tue, 14 Oct 2003, gizara wrote:
> Congratulations, Bernd!
> In about a month or so, when we get our hardware in-hand, we'd like to do
> something like this also.
> We may eventually wish to migrate to kernal 2.6 shortly thereafter.
> Having just started on this, I have downloaded the source tree as directed
> (scrolling all the way down to...)
> How do I set GEODE video?
> >From christer at weinigel.se Wed Nov 27 07:47:17 2002
> "...look at the freebios/src/mainboard/nano/nano
> directory and make a copy of it..."
> Which looks mostly complete, although it sounds like you may recently have
> gone a bit further.
> "Alan Cox' 2.5 kernel also has support for doing DMA on the SC1200 IDE"
> which may may benefit our application...
> So if you will, any suggestions would be greatly appreciated!
> ----- Original Message -----
> From: "Bernd Mödeker" <moedeker at hmk-gmbh.de>
> To: <linuxbios at clustermatic.org>
> Sent: Tuesday, October 14, 2003 5:56 AM
> Subject: SC1200 and framebuffer under 2.4.22 without having vga-bios or
> VSA-bios is up
> > Hi list,
> > after several hours we did it.
> > - Linuxbios-1.0.0
> > - Linux 2.4.22 with geode patches
> > - framebuffer driver v2.77
> > If anyone is interested please mail me.
> > Bernd
> > _______________________________________________
> > Linuxbios mailing list
> > Linuxbios at clustermatic.org
> > http://www.clustermatic.org/mailman/listinfo/linuxbios
> Linuxbios mailing list
> Linuxbios at clustermatic.org
More information about the coreboot