Solo tests with 1.1.5 fail

Stefan Reinauer stepan at suse.de
Wed Oct 15 09:58:00 CEST 2003


* Stefan Reinauer <stepan at suse.de> [031013 13:08]:
> Hi,
> 
> I get reboots again, this time it's not dependent on the gcc version I
> use.. Eric, there are some weird bits in the attached log, can you help
> to interpret them? From what I see some the SuperIO setup has severe
> trouble, and some of the resources seem to be given out twice...

Ok, I enabled the hard reset function for AMD Solo, and this changes the
resulting behaviour noticably. No more endless rebooting, but a reboot
plus hang after complete pci init.

It seems the AGP brigde is initialized correctly though, the graphics
card is there...

Stefan

-- 
Architecture Team
    SuSE Linux AG
-------------- next part --------------
???

LinuxBIOS-1.1.5.0-Fallback Mi Okt 15 15:30:52 CEST 2003 starting...
setting up resource map....
done.
Enabling routing table for node 00000000 done.
Enabling UP settings
Disabling read/write/fill probes for UP... done.
coherent_ht_finalize
done
SMBus controller enabled
Ram1.00
setting up CPU00 northbridge registers
done.
Ram2.00
disabling dimm01
disabling dimm01
133Mhz
disabling dimm01
Interleaved
RAM: 0x00040000 KB
Ram3
Initializing memory:  done
Ram4
Copying LinuxBIOS to ram.
Jumping to LinuxBIOS.
LinuxBIOS-1.1.5.0-Fallback Mi Okt 15 15:30:52 CEST 2003 booting...
Finding PCI configuration type.
PCI: Using configuration type 1
Enumerating: AMD K8 Northbridge
Enumerating: AMD K8
Enumerating: AMD 8111
Enumerating: NSC 87360
Enumerating buses...PCI: pci_scan_bus for bus 0
PCI: 00:18.0 [1022/1100] enabled
PCI: 00:18.1 [1022/1101] enabled
PCI: 00:18.2 [1022/1102] enabled
PCI: 00:18.3 [1022/1103] ops
PCI: 00:18.3 [1022/1103] enabled
amdk8_scan_chains max: 0 starting...
Hyper transport scan link: 0 max: 1
PCI: 01:01.0 [1022/7454] enabled next_unitid: 0004
PCI: 01:04.0 [1022/7460] enabled next_unitid: 0008
HyperT reset needed


LinuxBIOS-1.1.5.0-Fallback Mi Okt 15 15:30:52 CEST 2003 starting...
setting up resource map....
done.
Enabling routing table for node 00000000 done.
Enabling UP settings
Disabling read/write/fill probes for UP... done.
coherent_ht_finalize
done
SMBus controller enabled
Ram1.00
setting up CPU00 northbridge registers
done.
Ram2.00
disabling dimm01
disabling dimm01
133Mhz
disabling dimm01
Interleaved
RAM: 0x00040000 KB
Ram3
Initializing memory:  done
Ram4
Copying LinuxBIOS to ram.
Jumping to LinuxBIOS.
LinuxBIOS-1.1.5.0-Fallback Mi Okt 15 15:30:52 CEST 2003 booting...
Finding PCI configuration type.
PCI: Using configuration type 1
Enumerating: AMD K8 Northbridge
Enumerating: AMD K8
Enumerating: AMD 8111
Enumerating: NSC 87360
Enumerating buses...PCI: pci_scan_bus for bus 0
PCI: 00:18.0 [1022/1100] enabled
PCI: 00:18.1 [1022/1101] enabled
PCI: 00:18.2 [1022/1102] enabled
PCI: 00:18.3 [1022/1103] ops
PCI: 00:18.3 [1022/1103] enabled
amdk8_scan_chains max: 0 starting...
Hyper transport scan link: 0 max: 1
PCI: 01:01.0 [1022/7454] enabled next_unitid: 0004
PCI: 01:04.0 [1022/7460] enabled next_unitid: 0008
HyperT reset not needed
PCI: pci_scan_bus for bus 1
PCI: 01:01.0 [1022/7454] ops
PCI: 01:01.0 [1022/7454] enabled
PCI: 01:02.0 [1022/7455] bus ops
PCI: 01:02.0 [1022/7455] enabled
PCI: 01:04.0 [1022/7460] enabled
PCI: 01:05.0 [1022/7468] bus ops
PCI: 01:05.0 [1022/7468] enabled
PCI: 01:05.1 [1022/7469] ops
PCI: 01:05.1 [1022/7469] enabled
PCI: 01:05.2 [1022/746a] enabled
PCI: 01:05.3 [1022/746b] ops
PCI: 01:05.3 [1022/746b] enabled
amd8111_enable dev: PCI: 01:05.5 lpc_dev: PCI: 01:05.0 index: 5 reg: ffff -> ffdf done
PCI: 01:05.5 [ffff/ffff] disabled
amd8111_enable dev: PCI: 01:05.6 lpc_dev: PCI: 01:05.0 index: 6 reg: ffdf -> ff9f done
PCI: 01:05.6 [ffff/ffff] disabled
PCI: pci_scan_bus for bus 2
PCI: 02:00.0 [1002/5157] enabled
PCI: pci_scan_bus returning with max=02
PCI: pci_scan_bus for bus 3
PCI: 03:00.0 [1022/7464] ops
PCI: 03:00.0 [1022/7464] enabled
PCI: 03:00.1 [1022/7464] ops
PCI: 03:00.1 [1022/7464] enabled
PCI: 03:00.2 [1022/7463] ops
PCI: 03:00.2 [1022/7463] enabled
amd8111_enable dev: PCI: 03:01.0 lpc_dev: PCI: 01:05.0 index: 9 reg: ff9f -> fd9f done
PCI: 03:01.0 [ffff/ffff] disabled
PCI: 03:05.0 [10b7/9200] enabled
Copying LinuxBIOS to ram.
Jumping to LinuxBIOS.
LinuxBIOS-1.1.5.0-Fallback Mi Okt 15 15:30:52 CEST 2003 rebooting...


More information about the coreboot mailing list