filo on Tyan s2880

[Stefan Reinauer]

* SONE Takeshi <ts1 at tsn.or.jp> [031030 11:40]:
> On Thu, Oct 30, 2003 at 11:34:29AM +0100, Stefan Reinauer wrote:
> > I am using an etherboot payload that reads an elf image from
> > the first sectors on the disk. This works fine, I put filo there
> > so I can load a kernel from any filesystem. Unfortunately filo seems
> > to find no IDE controller, it says IDE channel 0 not found.
> > Etherboot and Linux can see the ide controller though (it's on bus 1)
> 
> Maybe the problem is with my PCI code.

Bus 1 is not scanned.
Disabling SUPPORT_PCI in the Config file solved the problem.

  Stefan

-- 
     Stefan Reinauer, SUSE LINUX AG
Teamleader Architecture Development