boot A6T stopped at jmp 0x8000:0000

zhu shi song zhushisongzhu at yahoo.com
Wed Aug 11 04:46:00 CEST 2004


I have tested my SDRAM booting memtest86.  The memory
is OK.  Maybe vt8601 northbridge sdram init has
something wrong.
There is another question, how to setup the FSB of
sis630ET?  I've got ECS p6stmt MB based on sis630ET.
After reading the values of pci registers, its bios
have used synchronous mode of SDRAM.  I think
synchronous mode means FSB is equal to SDRAM clock. 
My SDRAM is 100Mhz.  So I must set MB FSB to 100Mhz. 
The default FSB of the MB on powering is 66Mhz.

tks
zhu

--- ron minnich <rminnich at lanl.gov> wrote:

> On Tue, 10 Aug 2004, zhu shi song wrote:
> 
> >   (4)When IPL jumped to 0x8000:0000, the first
> line of
> > linuxbios couldn't be executed.  Halted.
> 
> try booting memtest86, I think your memory is wrong.
> 
> ron
> -- 
> LANL CCS-1 email flavor:
> ***** Correspondence   []
> ***** DUSA LACSI-HW    [x ]
> ***** DUSA LACSI-OS    [ ]
> ***** DUSA LACSI-CS    [ ]
> 
> 
> 



		
_______________________________
Do you Yahoo!?
Express yourself with Y! Messenger! Free. Download now. 
http://messenger.yahoo.com



More information about the coreboot mailing list