Subject: Re: AMD Serenade: Filo can't find/access ATA HD (IDE - /dev/hda)
kfuchs at winternet.com
Mon Aug 16 10:37:01 CEST 2004
This problem was solved with help from Stefan Reinauer and David
Hendricks. Many thanks to you both!
Stefan Reinauer wrote:
>This is a filo "problem", it stops before it even tries to boot
>You need to force filo to probe all the PCI busses, not only bus 0. See
>the mailing list archive for more information..
I started to modify pci_scan_bus() to scan all buses and then ...
David W. Hendricks wrote:
>Is PCI_BRUTE_SCAN = 1 set in your FILO Config file?
Oops, filo 0.4.2 already has pci_scan() defined to scan all buses, if
PCI_BRUTE_SCAN is set to 1.
Again, thank you, Stefan and David.
Ken Fuchs <kfuchs at winternet.com>
More information about the coreboot