答复: SuperIO w83627hf. support.
YhLu at tyan.com
Wed Jan 14 19:56:01 CET 2004
Yes, may only sio_enable() and struct pnp_dev_info and enumerate should be
发件人: ebiederman at lnxi.com [mailto:ebiederman at lnxi.com]
发送时间: 2004年1月14日 16:50
抄送: ron minnich; linuxbios at clustermatic.org
主题: Re: SuperIO w83627hf. support.
YhLu <YhLu at tyan.com> writes:
> Eric or Ron or Stefan,,
> I want to who's dev src/superio/NSC/pc87360.
> I have tried to copy and modify for winbond/w83627hf to make FDC and
> Keyboard to work. Some resource can not be set to the several reg.
The only piece I am seeing, is that the irq resources that are not
hard coded are not being allocated automatically.
The basic problem is that we don't have an irq allocator in LinuxBIOS,
We also could use a legacy address allocator as well to automatically
put these things at their legacy addresses if possible.
My latest build (still needs to be merged) I just turned off all of
the devices I didn't care about which made the irq assignment problems
go away. It is a bad long term solution but it is ok in the short
> Can you tell why call it 2e...
Because that is the base configuration port. Figuring out
what kind of paths to use for devices like this is a bit of
I forget but I think there was a considerable about of infrastructure
in the super.c file you copied that probably should be moved to
a generic file some place.
More information about the coreboot