Filo Error Help

[David Aubin]

Hi,

  I am unable to get my kernel & initrd off of the usb stick.  I was
reading
through the documents and came across this line in
README.etherboot_in_filo: 
You can not use filo and ide_disk at the same time.

  Can you tell me what this means?  Do I need to rebuild filo without
IDE
support to get USB support?

  Just to recap:  My kernel & initrd fails as the initrd execution
complaining of
a bad CRC when I use the elf as a payload to load with with filo.  I
then try
uda1:/kernel initrd=/boot/initrd root=/dev/sda1 and I get those td
errors.  I then
tried your ramfs.elf and I get the same behavior are my elf image with
the CRC
complaining when the initrd portion is executed.  Note, I have confirmed
my elf
works with etherboot, just not filo yet....

  The CRC error makes me think that the image did not get loaded
correctly
by the elf boot.  Can you confirm you used Eric's mkelfImage2-5?  Here
is
my dump of the readelf -a.  

ELF Header:
  Magic:   7f 45 4c 46 01 01 01 00 00 00 00 00 00 00 00 00
  Class:                             ELF32
  Data:                              2's complement, little endian
  Version:                           1 (current)
  OS/ABI:                            UNIX - System V
  ABI Version:                       0
  Type:                              EXEC (Executable file)
  Machine:                           Intel 80386
  Version:                           0x1
  Entry point address:               0x10000
  Start of program headers:          52 (bytes into file)
  Start of section headers:          0 (bytes into file)
  Flags:                             0x0
  Size of this header:               52 (bytes)
  Size of program headers:           32 (bytes)
  Number of program headers:         5
  Size of section headers:           0 (bytes)
  Number of section headers:         0
  Section header string table index: 0
                                                                                                                             
There are no sections in this file.
                                                                                                                             
Program Headers:
  Type           Offset   VirtAddr   PhysAddr   FileSiz MemSiz  Flg
Align
  NOTE           0x0000d4 0x00000000 0x00000000 0x00088 0x00088 RWE 0
  LOAD           0x00015c 0x00010000 0x00010000 0x0559c 0x1aa24 RWE 0
  LOAD           0x0056f8 0x00091000 0x00091000 0x00000 0x00070 RWE 0
  LOAD           0x0056f8 0x00100000 0x00100000 0x1a952a 0x700000 RWE 0
  LOAD           0x1aec22 0x00800000 0x00800000 0x2769f5 0x2769f5 RWE 0
                                                                                                                             
There is no dynamic segment in this file.
                                                                                                                             
There are no relocations in this file.
                                                                                                                             
There are no unwind sections in this file.
                                                                                                                             
No version information found in this file.


Thanks,
Dave

On Fri, 2004-07-09 at 15:48, YhLu wrote:

> I have got two cpus and four dimms for every CPU.
> 
>  
> 
> YH
> 
>  
> 
>                                    
> ______________________________________________________________________
> 
> From:David Aubin [mailto:daubin at actuality-systems.com] 
> Sent: Friday, July 09, 2004 12:07 PM
> To: YhLu
> Cc: Hendricks David W.; ron minnich; LinuxBIOS
> Subject: RE: Filo Error Help
> 
> 
>  
> 
> Hi,
> 
>   Yes, I did, but I don't have a DHCP environment so it kept searching
> at the DHCP phase.
> 
>   This problem is odd.  I can boot my elf fine with etherboot, but not
> with filo.  I can boot
> my kernel fine with filo, but not the initrd.  I can even boot your
> kernel of the ram.elf you
> sent me, but when it hits the initrd it fails with the same error as
> mine.
> 
>   I suspect either my filo is not configured like yours or that there
> is a problem loading a
> mulitpart elf (kernel & initrd in filo).  I'm confused as to why filo
> didn't just use the etherboot
> portion of elf_load.  It could be you were on the, "bleeding" edge?
> ;)  
> 
>   Can you tell me how much memory you have in your working system?  I
> have just
> one cpu and 512meg memory.  Curious if loading it high & it runs out
> of memory or
> something like that.
> 
> Thanks,
> Dave
> 
> 
> On Fri, 2004-07-09 at 13:05, YhLu wrote: 
> 
> 
> Did you try the tg3--filo.zelf I sent to you?
>  
> YH
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20040712/75777184/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.gif
Type: image/gif
Size: 1066 bytes
Desc: not available
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20040712/75777184/attachment.gif>