Compile Error while doing make
Thomas Leidenfrost
leidenfrost at corscience.de
Mon Jul 19 15:00:00 CEST 2004
>> objcopy -O binary -R .note -R .comment -S /boot/vmlinux linux.bin
>> objcopy: /boot/vmlinux: File format not recognized
>> make: *** [linux.bin] Error 1
>>
>
> The error your getting above is because you have the default payload
> setup and it dosen't exist. If you don't specify a payload it defaults
> to linux. The actual linuxbios build is complete. You can take
> linuxbios.rom and put it in a chip. Only linuxbios will run though
> since you don't have a payload.
How do I specify a payload? I decompressed the sources of my actual
running kernel (2.4.22)
to /stuff2/Linuxe/kernel2422 and copied the current-used vmlinux into
the same directory.
But thats not all, I think...
> Make sure you document up all the changes you had to make and funnel
> them back to the list so CVS can be updated and it works for the next guy.
I'll do after successful testing! :-)
Greetz, Tom
> _______________________________________________
> Linuxbios mailing list
> Linuxbios at clustermatic.org
> http://www.clustermatic.org/mailman/listinfo/linuxbios
More information about the coreboot
mailing list