答复: 答复: Which kernel for framebuffering?

[YhLu]

So the IBM MB does't work again? 
Can not get output in CRT or sth?

YH

-----邮件原件-----
发件人: Li-Ta Lo [mailto:ollie at lanl.gov] 
发送时间: 2004年5月6日 14:46
收件人: YhLu
抄送: Hendricks David W.; LinuxBIOS
主题: Re: 答复: Which kernel for framebuffering?

On Wed, 2004-05-05 at 13:39, YhLu wrote:

did you do anything with the LDT/Resource for VGA Card ? We have problem
on the IBM/e325 which has different HT topology with hdama.

Ollie

> 
> Worked nicely :) The keyboard worked at FILO, but did not work after the 
> kernel booted. It didn't even show IRQ 1 in /proc/interrupts. Weird, but I

> guess that's another matter. I'm just very, very happy to see Linux boot 
> into a console I can see on a real monitor :) 
> 
> On Tue, 4 May 2004, YhLu wrote:
> 
> > David,
> > 
> > Please refer to the patch for 2.4.22 and 2.6.5, or you can put that in
CVS
> > ...
> > 
> > Also please refer to the matix to see which kernel you want to use.
> > 
> > Please make sure enable ati xl framebuffer only in kernel config. (
don't
> > enable noinit)
> > 
> > Regards
> > 
> > YH
> >