New problems with building Baremetal

[YhLu]

Steven,

I made some progress, and it met failed transaction.

Regards

YH

[FILO]FILO version 0.4.1 (root at tst2723-rh9) Tue May 11 20:39:11 PDT 2004
Press <Enter> for default boot, or <Esc> for boot prompt... timed out
boot: uda1:/ram0_2.5_2.6.5_k8.2_mydisk7.elf
LinuxLabs USB bootloader
raw frame_list is at 000795c0
frame_list is at 0007a000
frame_list_link: addr: 000785d0
frame_list_link:  raw addr: efef5f40
frame_list_link: terminate: 00000000
frame_list_link: queue: 00000001
frame_list_link: depth: 00000000
dummy_td = 00070560
raw frame_list is at 0007b5c0
frame_list is at 0007c000
frame_list_link: addr: 000785f0
frame_list_link:  raw addr: efef5f60
frame_list_link: terminate: 00000000
frame_list_link: queue: 00000001
frame_list_link: depth: 00000000
dummy_td = 000705a0
raw frame_list is at 0007d5c0
frame_list is at 0007e000
frame_list_link: addr: 00078610
frame_list_link:  raw addr: efef5f80
frame_list_link: terminate: 00000000
frame_list_link: queue: 00000001
frame_list_link: depth: 00000000
dummy_td = 000705e0
raw frame_list is at 0007f5c0
frame_list is at 00080000
frame_list_link: addr: 00078630
frame_list_link:  raw addr: efef5fa0
frame_list_link: terminate: 00000000
frame_list_link: queue: 00000001
frame_list_link: depth: 00000000
dummy_td = 00070620
Found OHCI at 0d1a2690
Resetting OHCI
USB HC reset_hc usb-0d1a2690: ctrl = 0x00000600 ;ohc_init setting framelist
to: efef7970
Starting OHCI
Found OHCI at 0d1a3690
Resetting OHCI
USB HC reset_hc usb-0d1a3690: ctrl = 0x00000600 ;ohc_init setting framelist
to: efef9970
Starting OHCI
poll_usb1 i=0   poll_o_root_hub1 v=00000100     poll_o_root_hub1 v=00000100
poll_o_root_hub1 v=00000100poll_usb1 i=1   poll_o_root_hub1 v=00000100
poll_o_root_hub1 v=00010101     poll_o_root_hub2 v=00010101poll_o_root_hub21
v=00010101    Connection on port 0d1a36e8
poll_o_root_hub211 v=00000101   poll_o_root_hub212 v=00000101
poll_o_root_hub213 v=00000101   poll_o_root_hub214 v=00000101  New USB
device, setting address 00000003
UHCI at 0d1a3690
failed_transaction: TD(00070660):
failed_transaction: type: SETUP
failed_transaction: retries: 00000003
failed_transaction: IOC
failed_transaction: active: 00000001
failed_transaction: device_addr: 00000000
failed_transaction: endpoint: 00000000
failed_transaction: data_toggle: 00000000
failed_transaction: max_transfer: 00000007
failed_transaction: actual: 00000000
failed_transaction: link:
        failed_transaction: addr: 00070680
        failed_transaction:  raw addr: efeedff0
        failed_transaction: terminate: 00000000
        failed_transaction: queue: 00000000
        failed_transaction: depth: 00000000
failed_transaction: TD(00070680):
failed_transaction: type: IN
failed_transaction: retries: 00000000
failed_transaction: active: 00000001
failed_transaction: device_addr: 00000000
failed_transaction: endpoint: 00000000
failed_transaction: data_toggle: 00000001
failed_transaction: max_transfer: 000007ff
failed_transaction: actual: 00000000
failed_transaction: link:
        failed_transaction:ddr: 10182690
        failed_transaction:aw addr: 00000000
        failed_transaction:erminate: 00000001
        failed_transaction:ueue: 00000000
        failed_transaction:epth: 00000000
configure_device: set_address failed!
configure_device: can't set address! bailing!



-------------- next part --------------
A non-text attachment was scrubbed...
Name: usb.tar.bz2
Type: application/octet-stream
Size: 20322 bytes
Desc: not available
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20040511/0e51f132/attachment.obj>