USB boot

YhLu YhLu at tyan.com
Fri May 14 19:42:01 CEST 2004


Here are the new results.

1. for usb_control_msg: every return + 2047 packet????
2. for bulk_transfer: every out is ok, but every in only return fixed 2048
len data.

Regards

YH

Loading Etherboot version: 5.2.4
ROM segment 0x0000 length 0x0000 reloc 0x00020000
CPU 2285 Mhz
Etherboot 5.2.4 (GPL) http://etherboot.org Tagged ELF for [TG3][FILO]
Relocating _text from: [0002d5f0,0008fc20) to [efe9d9d0,eff00000)
Probing pci nic...
[tg3-5704]Ethernet addr: 00:E0:81:61:8C:27
Tigon3 [partno(BCM95704A6) rev 2003 PHY(5401)] (PCIX:100MHz:64-bit)
<abort>
Probing pci nic...
[tg3-5704]Ethernet addr: 00:E0:81:61:8C:28
Tigon3 [partno(BCM95704A6) rev 2003 PHY(5704)] (PCIX:100MHz:64-bit)
<abort>
Probing pci nic...
Probing pci disk...
[FILO]FILO version 0.4.1 (root at tst2723-rh9) Fri May 14 17:10:13 PDT 2004
Press <Enter> for default boot, or <Esc> for boot prompt...  
boot: uda1:/ram0_2.5_2.6.5_k8.2_mydisk7.elf
LinuxLabs USB bootloader
raw frame_list is at 00079560
frame_list is at 00079630
frame_list_link: addr: 00078570
frame_list_link:  raw addr: efef5f40
frame_list_link: terminate: 00000000
frame_list_link: queue: 00000001
frame_list_link: depth: 00000000
dummy_td = 00070500
raw frame_list is at 0007b560
frame_list is at 0007b630
frame_list_link: addr: 00078590
frame_list_link:  raw addr: efef5f60
frame_list_link: terminate: 00000000
frame_list_link: queue: 00000001
frame_list_link: depth: 00000000
dummy_td = 00070540
raw frame_list is at 0007d560
frame_list is at 0007d630
frame_list_link: addr: 000785b0
frame_list_link:  raw addr: efef5f80
frame_list_link: terminate: 00000000
frame_list_link: queue: 00000001
frame_list_link: depth: 00000000
dummy_td = 00070580
raw frame_list is at 0007f560
frame_list is at 0007f630
frame_list_link: addr: 000785d0
frame_list_link:  raw addr: efef5fa0
frame_list_link: terminate: 00000000
frame_list_link: queue: 00000001
frame_list_link: depth: 00000000
dummy_td = 000705c0
Found OHCI at 0d182630
Resetting OHCI
USB HC reset_hc usb-0d182630: ctrl = 0x00000600 ;ohc_init setting framelist
to: efef7000
Starting OHCI
Found OHCI at 0d183630
Resetting OHCI
USB HC reset_hc usb-0d183630: ctrl = 0x00000600 ;ohc_init setting framelist
to: efef9000
Starting OHCI
Found UHCI at 00002400
Resetting UHCI
uhc_init setting framelist to: efefb000
Starting UHCI
HCI at 00002400
Found UHCI at 00002420
Resetting UHCI
uhc_init setting framelist to: efefd000
Starting UHCI
HCI at 00002420
poll_usb1 i=0   poll_usb1 i=1   poll_usb1 i=2   poll_u_root_hub1 v=00000480
poll_u_root_hub1 v=00001493poll_u_root_hub2 v=00001493     poll_u_root_hub21
v=00001493    Connection on port 00002412
New USB device, setting address 00000003
usb_control_msg: request_type = 00000000 request = 00000005 wLength=0
usb_control_message returning 2047
Fetching device descriptor length
usb_control_msg: request_type = 00000080 request = 00000006 wLength=8
usb_control_message returning 2054
Fetching device descriptor
usb_control_msg: request_type = 00000080 request = 00000006 wLength=18
usb_control_message returning 2064
Fetching config descriptor length
usb_control_msg: request_type = 00000080 request = 00000006 wLength=8
usb_control_message returning 2054
Fetching config descriptor
usb_control_msg: request_type = 00000080 request = 00000006 wLength=32
usb_control_message returning 2078
device:
bLength: 00000012
type: 00000001
bcdVersion: 0000000200000000
Class: 00000000
SubClass: 00000000
protocol: 00000000
max_packet: 00000040
idVendor: 00001005
idProduct: 0000b113
bcdDeviceVersion: 0000000100000000
iManufacturor: 00000000
iProduct: 00000001
iSerial: 00000002
bNumConfig: 00000001
config:
bLength: 00000009
type: 00000002
wTotalLength: 00000020
bNumInterfaces: 00000001
bConfigurationValue: 00000001
iConfiguration: 00000000
bmAttributes: 00000080
bMaxPower: 000000fa

Interface(00081e6b):
        bLength: 00000009
        type: 00000004
        bInterfaceNumber: 00000000
        bAlternateSetting: 00000000
        bNumEndpoints: 00000002
        bInterfaceClass: 00000008
        bInterfaceSubClass: 00000006
        bInterfaceProtocol: 00000050
        iInterface: 00000000

        Endpoint (00081e74):
                bLength: 00000007
                type: 00000005
                bEndpointAddress: 00000081
                bmAttributes: 00000002
                wMaxPacketSize: 00000040
                bInterval: 00000000

        Endpoint (00081e7b):
                bLength: 00000007
                type: 00000005
                bEndpointAddress: 00000002
                bmAttributes: 00000002
                wMaxPacketSize: 00000040
                bInterval: 00000000
Selecting Configuration number 00000001:
usb_control_msg: request_type = 00000000 request = 00000009 wLength=0
usb_control_message returning 2047
clear stall on ep=00000081
usb_control_msg: request_type = 00000002 request = 00000001 wLength=0
usb_control_message returning 2047
clear stall on ep=00000002
usb_control_msg: request_type = 00000002 request = 00000001 wLength=0
usb_control_message returning 2047
00000008:00000006:00000050
Manufacturor: unknown
usb_control_msg: request_type = 00000080 request = 00000006 wLength=4
usb_control_message returning 2050
usb_control_msg: request_type = 00000080 request = 00000006 wLength=32
usb_control_message returning 2078
Product: USB Flash Drive
usb_control_msg: request_type = 00000080 request = 00000006 wLength=4
usb_control_message returning 2050
usb_control_msg: request_type = 00000080 request = 00000006 wLength=32
usb_control_message returning 2078
Serial: 070B01001340CA0
desc address (phy) = efeff820, (virt) = 00081e50
conf address (phy) = efeff832, (virt) = 00081e62
Mass storage, bulk only SCSI transparent
Requesting initial sense data
bulk_transfer: ep = 00000002 len=31
bulk_transfer returning 31
bulk_transfer: ep = 00000081 len=32
bulk_transfer returning 2048
bulk_transfer: ep = 00000081 len=13
bulk_transfer returning 2048
sense data
:00000000:00000000:00000000:00000000:00000000:00000000:00000000:00000000:000
00000:00000000:00000000:00000000:00000000:00000000:00000000:00000000:0000000
0:00000000:00000000:00000000:00000000:00000000:00000000:00000000:00000000:00
000000:00000000:00000000:00000000:00000000:00000000:00000000

code = 00000000 key = 00000000

Info: 00000000
bulk_transfer: ep = 00000002 len=31
bulk_transfer returning 31
scsi_command reading 8 bytes
bulk_transfer: ep = 00000081 len=8
bulk_transfer returning 2048
scsi_command read 2048 bytes
scsi_command fetching csw
bulk_transfer: ep = 00000081 len=13
bulk_transfer returning 2048
scsi_command csw is 2048 bytes
1 0 byte blocks
part address (phy) = efeff400, (virt) = 00081a30
bulk_transfer: ep = 00000002 len=31
bulk_transfer returning 31
scsi_command reading 512 bytes
bulk_transfer: ep = 00000081 len=512
bulk_transfer returning 2048
scsi_command read 2048 bytes
scsi_command fetching csw
bulk_transfer: ep = 00000081 len=13
bulk_transfer returning 2048
scsi_command csw is 2048 bytes
ll_read_block returns 512
0: boot=00000000, start=00000000 length=00000000
1: boot=00000000, start=00000000 length=00000000
2: boot=00000000, start=00000000 length=00000000
3: boot=00000000, start=00000000 length=00000000
DEVICE CONFIGURED
poll_usb1 i=3   poll_u_root_hub1 v=00000480     poll_u_root_hub1 v=00000480
poll_usb1 i=0   poll_usb1 i=1poll_usb1 i=2   poll_u_root_hub1 v=00000480
poll_u_root_hub1 v=00000495     poll_usb1 i=3   poll_u_root_hub1 v=00000480
poll_u_root_hub1 v=00000480     Found USB block device 3
Requesting initial sense data
bulk_transfer: ep = 00000002 len=31
bulk_transfer returning 31
bulk_transfer: ep = 00000081 len=32
bulk_transfer returning 2048
bulk_transfer: ep = 00000081 len=13
bulk_transfer returning 2048
sense data
:00000000:00000000:00000000:00000000:00000000:00000000:00000000:00000000:000
00000:00000000:00000000:00000000:00000000:00000000:00000000:00000000:0000000
0:00000000:00000000:00000000:00000000:00000000:00000000:00000000:00000000:00
000000:00000000:00000000:00000000:00000000:00000000:00000000

code = 00000000 key = 00000000

Info: 00000000
bulk_transfer: ep = 00000002 len=31
bulk_transfer returning 31
scsi_command reading 512 bytes
bulk_transfer: ep = 00000081 len=512
bulk_transfer returning 2048
scsi_command read 2048 bytes
scsi_command fetching csw
bulk_transfer: ep = 00000081 len=13
bulk_transfer returning 2048
scsi_command csw is 2048 bytes
ll_read_block returns 512
part address (phy) = efeffa94, (virt) = 000820c4
0: boot=00000000, start=00000000 length=00000000
1: boot=00000000, start=00000000 length=00000000
2: boot=00000000, start=00000000 length=00000000
3: boot=00000000, start=00000000 length=00000000
sector= 0     bulk_transfer: ep = 00000002 len=31
bulk_transfer returning 31
scsi_command reading 512 bytes
bulk_transfer: ep = 00000081 len=512
bulk_transfer returning 2048
scsi_command read 2048 bytes
scsi_command fetching csw
bulk_transfer: ep = 00000081 len=13
bulk_transfer returning 2048
scsi_command csw is 2048 bytes
sector= 68      bulk_transfer: ep = 00000002 len=31
bulk_transfer returning 31
scsi_command reading 512 bytes
bulk_transfer: ep = 00000081 len=512
bulk_transfer returning 2048
scsi_command read 2048 bytes
scsi_command fetching csw
bulk_transfer: ep = 00000081 len=13
bulk_transfer returning 2048
scsi_command csw is 2048 bytes



More information about the coreboot mailing list