答复: Getting Started with freebios2!
YhLu
YhLu at tyan.com
Thu May 27 13:36:00 CEST 2004
Did you use
export LANG=en_US
before make bin/tg3--filo.zelf?
Or I could send one tg3_filo.zelf to you?
Regards
YH
-----邮件原件-----
发件人: ebiederman at lnxi.com [mailto:ebiederman at lnxi.com]
发送时间: 2004年5月27日 11:48
收件人: Jay Miller
抄送: Eric W. Biederman; LinuxBIOS
主题: Re: Getting Started with freebios2!
"Jay Miller" <jmiller at actuality-systems.com> writes:
> That's why I thought that elfboot couldn't read .zelf, because the image
> sizes are incorrect. Actual image size for the tg3--filo.zelf image
> is 43,153 bytes, which is smaller than the file.elf image 43,472 bytes.
> But when I make a linuxbios.rom with the tg3--filo.zelf as the payload,
> elfboot generates the output I sent you.
Run ``readelf -h -l'' on the problem image to see what the values
are before it is combined into LinuxBIOS. I suspect you have a
build problem, possible a messed up version of perl installed.
Eric
_______________________________________________
Linuxbios mailing list
Linuxbios at clustermatic.org
http://www.clustermatic.org/mailman/listinfo/linuxbios
More information about the coreboot
mailing list