Getting Started with freebios2!

[Jay Miller]

I think that I've been lucky using a stock RH9 distro.  I'm going to make sure I've got the latest binutils, etc... and retry.

By the way, what is the status on USB support?  I know you were getting close.

Thanks,
J

-----Original Message-----
From: YhLu [mailto:YhLu at tyan.com] 
Sent: Thursday, May 27, 2004 3:10 PM
To: ebiederman at lnxi.com; Jay Miller
Cc: LinuxBIOS
Subject: 答复: Getting Started with freebios2!

Did you use 
export LANG=en_US
before make bin/tg3--filo.zelf?

Or I could send one tg3_filo.zelf to you?

Regards

YH

-----邮件原件-----
发件人: ebiederman at lnxi.com [mailto:ebiederman at lnxi.com] 
发送时间: 2004年5月27日 11:48
收件人: Jay Miller
抄送: Eric W. Biederman; LinuxBIOS
主题: Re: Getting Started with freebios2!

"Jay Miller" <jmiller at actuality-systems.com> writes:

> That's why I thought that elfboot couldn't read .zelf, because the image
> sizes are incorrect.    Actual image size for the tg3--filo.zelf image
> is 43,153 bytes, which is smaller than the file.elf image 43,472 bytes.
> But when I make a linuxbios.rom with the tg3--filo.zelf as the payload,
> elfboot generates the output I sent you.

Run ``readelf -h -l'' on the problem image to see what the values
are before it is combined into LinuxBIOS.  I suspect you have a
build problem, possible a messed up version of perl installed.

Eric
_______________________________________________
Linuxbios mailing list
Linuxbios at clustermatic.org
http://www.clustermatic.org/mailman/listinfo/linuxbios