Weird K8 output

YhLu YhLu at tyan.com
Tue Nov 2 14:09:00 CET 2004


MB Model?
HT routing table?

YH

-----Original Message-----
From: Stefan Reinauer [mailto:stepan at openbios.org] 
Sent: Tuesday, November 02, 2004 12:06 PM
To: linuxbios at clustermatic.org
Subject: Weird K8 output

Hi,

on a 4cpu K8 system I get the following output before the system hangs..

Is the machine drunk or are CPU1-3 just running away?

LinuxBIOS-1.1.7.0-fallback Tue Nov  2 20:34:14 CET 2004 starting...
setting up resource map....done.
Enabling routing table for node 00 done.
Enabling SMP settings
setup_remote_node: done
Renaming current temporary node to 01 done.
anabling routing table for node 01 dConlee.
 tRiennamgin g mcutrrrenrt
  emporary node to 02 done.
Enabling routing table for node 02 dConle.e
mRernaiminngg c urmretntr tre
 porary node to 03 done.
Enabling routing table for node 03 dColnee.a
iz04n ngod esm itnirtiral
  ed.
coherent_ht_finalize
done
PCI_DEV=(0,0x18,0) 0xb4=00030000
bus=00 id =74501022
bus=00 id =74601022
PCI_DEV=(0,0x19,0) 0xd4=000a0400


Stefan
_______________________________________________
Linuxbios mailing list
Linuxbios at clustermatic.org
http://www.clustermatic.org/mailman/listinfo/linuxbios



More information about the coreboot mailing list