Removing device driver code in mainboard.c for Tyan boards?
YhLu
YhLu at tyan.com
Thu Nov 4 14:39:00 CET 2004
Please check the si/3114
I guess you need to keep
Ati
Si
Trident
Regards
YH
-----Original Message-----
From: YhLu
Sent: Thursday, November 04, 2004 12:37 PM
To: Li-Ta Lo
Cc: LinuxBIOS
Subject: RE: Removing device driver code in mainboard.c for Tyan boards?
Yes, We still need some, I will give a example about SI image chip.
Regards
YH
-----Original Message-----
From: Li-Ta Lo [mailto:ollie at lanl.gov]
Sent: Thursday, November 04, 2004 12:05 PM
To: YhLu
Cc: LinuxBIOS
Subject: RE: Removing device driver code in mainboard.c for Tyan boards?
On Thu, 2004-11-04 at 10:45, YhLu wrote:
> OK for me.
>
> Some line I want to use print mem or pci at the end of LinuxBIOS can not
be
> used now. Eric removed the CHIP_PASS....
>
I guess we don't need the driver/intel|si||adaptec|boradcom anymore ?
Ollie
> Regards
>
> YH
>
> -----Original Message-----
> From: Li-Ta Lo [mailto:ollie at lanl.gov]
> Sent: Thursday, November 04, 2004 9:07 AM
> To: YhLu; LinuxBIOS
> Subject: Removing device driver code in mainboard.c for Tyan boards?
>
> YhLu,
>
> Now we have a totally new device driver architecture, could we remove
> those #if 0 #endf code in the mainboard.c for Tyan board?
>
> Ollie
>
_______________________________________________
Linuxbios mailing list
Linuxbios at clustermatic.org
http://www.clustermatic.org/mailman/listinfo/linuxbios
More information about the coreboot
mailing list