pyro at linuxlabs.com
Sun Nov 14 14:05:00 CET 2004
I have successfully used the v1 code on that board. Things have been in
flux since then, and I haven't had time to test a recent CVS checkout or
the v2 tree.
On Thu, 11 Nov 2004, Gin wrote:
> Thanks for the info. I've got the ram up by filling the some values in
> North Bridge(I reference a regular bios).
> I have an essential question about the code base for Tyan/s2735. Has it
> ever successfully built and run on that board? I have to make sure the
> code I am currently building our board on is good.
> -----Original Message-----
> From: linuxbios-admin at clustermatic.org
> [mailto:linuxbios-admin at clustermatic.org] On Behalf Of Steven James
> Sent: Friday, November 05, 2004 10:40 PM
> To: Gin Lin
> Cc: linuxbios at clustermatic.org
> Subject: Re: ram init
> It's been a while since I've looked at it, but when I last looked, it
> sometimes need power cycled to restart. I worked around that by making
> kernel reboot by writing 0x0e to port 0xcf9. That causes the southbridge
> to do a 3 second power off.
> On Fri, 5 Nov 2004, Gin Lin wrote:
> > Does anyone know if the raminit.c under intel/E7501 is stable enough?
> I am
> > having a problem with the system reseting when it jumps to the first
> > in the ram. Could the procedures of writing NorthBrige registers have
> > problems?
> > thanks,
> > Gin
> > _______________________________________________
> > Linuxbios mailing list
> > Linuxbios at clustermatic.org
> > http://www.clustermatic.org/mailman/listinfo/linuxbios
> ||||| |||| ||||||||||||| |||
> by Linux Labs International, Inc.
> Steven James, CTO
> 55 Marietta Street
> Suite 1830
> Atlanta, Ga 30303
> 866 824 9737 support
> Linuxbios mailing list
> Linuxbios at clustermatic.org
||||| |||| ||||||||||||| |||
by Linux Labs International, Inc.
Steven James, CTO
55 Marietta Street
Atlanta, Ga 30303
866 824 9737 support
More information about the coreboot