FYI: Merge in progress...

[YhLu]

Werid, it should look for 1:0.0 instead of 1:1.0 before unit id is updated
in hypertransport_scan_chain.

YH

-----Original Message-----
From: YhLu 
Sent: Monday, October 18, 2004 10:36 AM
To: ebiederman at lnxi.com; Li-Ta Lo
Cc: 'Ronald G. Minnich'; 'LinuxBIOS'
Subject: RE: FYI: Merge in progress...

I got some err.

It seems scan_k8_chains is not called.


LinuxBIOS-1.1.62.0_Fallback Mon Oct 18 09:29:09 PDT 2004 booting...
Finding PCI configuration type.
PCI: Using configuration type 1
Enumerating buses...
scan_static_bus for Root Device
PCI_DOMAIN: 0000 enabled
APIC_CLUSTER: 0 enabled
PCI_DOMAIN: 0000 scanning...
PCI: pci_scan_bus for bus 0
PCI: 00:18.0 [1022/1100] bus ops
PCI: 00:18.0 [1022/1100] enabled
PCI: 00:18.1 [1022/1101] enabled
PCI: 00:18.2 [1022/1102] enabled
PCI: 00:18.3 [1022/1103] ops
PCI: 00:18.3 [1022/1103] enabled
PCI: 00:19.0 [1022/1100] bus ops
PCI: 00:19.0 [1022/1100] enabled
PCI: 00:19.1 [1022/1101] enabled
PCI: 00:19.2 [1022/1102] enabled
PCI: 00:19.3 [1022/1103] ops
PCI: 00:19.3 [1022/1103] enabled
PCI: 01:01.0 Hypertransport link capability not foundHyperT reset not needed
PCI: pci_scan_bus for bus 1
PCI: 01:00.0 [10de/005e] enabled
PCI: 01:01.0 [10de/0051] bus ops
PCI: 01:01.0 [10de/0051] enabled
PCI: 01:01.1 [10de/0052] enabled
scan_static_bus for PCI: 01:01.0
_______________________________________________
Linuxbios mailing list
Linuxbios at clustermatic.org
http://www.clustermatic.org/mailman/listinfo/linuxbios