PCI IRQ tables

[Dave Aubin]

Don't I wish!  PCI-X is dangled off of the 8131?  I think....
My memory is bad.  But one needs to configure the pci irq
Before getting to the pci-x in order to see it show up 
Correctly under linux by lspci.  Then I believe your 
Messages can be handled via the virtual signaled interrupts.

-----Original Message-----
From: linuxbios at mikebell.org [mailto:linuxbios at mikebell.org] 
Sent: Tuesday, October 19, 2004 1:17 PM
To: Liu Tao
Cc: YhLu; Dave Aubin; linuxbios at clustermatic.org
Subject: Re: PCI IRQ tables

On Tue, Oct 19, 2004 at 12:12:50PM +0800, Liu Tao wrote:
> Or does the interrupt router in pirq table only responses of legacy 
> 32bitPCI/ISA devices, and Linux handles all the AMD8131?

Forgive my ignorance, but doesn't the fact that PCI-X is all message
signaled interrupts obviate the need for a PCIIRQ table?