Freebios2 recovery progress...

[Li-Ta Lo]

On Thu, 2004-10-21 at 12:28, YhLu wrote:
> No., Onboard scsi subsystem id should be same to others.
> 

O.K. 

Ollie

> -----Original Message-----
> From: Li-Ta Lo [mailto:ollie at lanl.gov] 
> Sent: Thursday, October 21, 2004 11:21 AM
> To: Eric W. Biederman
> Cc: YhLu; LinuxBIOS
> Subject: Re: Freebios2 recovery progress...
> 
> On Thu, 2004-10-21 at 11:56, Eric W. Biederman wrote:
> > 
> > The .set_subsystem simply exists because there is not
> > a standard way to set that value.  The almost generic
> > version is in src/devices/pci_device.c but I can use
> > it only occasionally.
> >  
> > > device pci 0.0 on
> > > 	vendor 0x1234
> > > 	device 0x5678
> > > end
> > > 
> > > or
> > > 
> > > device pci 0.0 on
> > > 	register "subsystem_vendor_id" = "0x1234"
> > > 	register "subsystem_device_id" = "0x5678"
> > > end
> > 
> > I don't see the benefit of those methods over having
> > an Option if you have exactly 1 subsystem vendor_id+device_id that
> > need to be set.
> > 
> 
> YhLu's intention is to set subsystem ID differently for each devices
> on the mainboard. It is totally the opposite to what you want and doing.
> 
> Ollie
>