boot linux from an ide
Ronald G. Minnich
rminnich at lanl.gov
Wed Oct 27 14:49:01 CEST 2004
On Wed, 27 Oct 2004, Steve Kimball wrote:
> To use FILO or Etherboot you change the payload.
> So you need to change the
> freebios2/targets/<vendor>/<board>/Config.lb
> file to point to the FILO or Etherboot payload
> and make linuxbios.rom.
don't forget you can make your own!
I have
targets/arima/hdama/Config.filo.lb
and I do this:
./buildtarget arima/hdama/Config.filo.lb
File is this:
# Sample config file for the Arima HDAMA
target hdama.filo
mainboard arima/hdama
romimage "normal"
option USE_FALLBACK_IMAGE=0
option ROM_IMAGE_SIZE=0x10000
option LINUXBIOS_EXTRA_VERSION=".0Normal"
payload /opt/filo/normal/filo.elf
end
romimage "fallback"
option USE_FALLBACK_IMAGE=1
option ROM_IMAGE_SIZE=0x10000
option LINUXBIOS_EXTRA_VERSION=".0Fallback"
payload /opt/filo/fallback/filo.elf
end
buildrom ./linuxbios.rom ROM_SIZE "normal" "fallback"
More information about the coreboot
mailing list