building romimage for tyan s2850 mainboard

[Stefan Reinauer]

* Sagiv Yefet <sagivy at 3vium.com> [040912 12:50]:
> In order to start I wanted to build only the normal image. Only to see
> some output in the console.
> 
> I made the following changes in Config.lb: 
> 
> * put the romimage "fallback" statement in comment.
> * FALLBACK_SIZE =0.
> * HAVE_FALLBACK_BOOT = 0
> * remove "fallback from build: buildrom ./linuxbios.rom ROM_SIZE
> "normal"

The way LinuxBIOS is built you need to build a fallback image without
normal image instead. This will work. 

The fallback image is more a "base image" whereas the normal image is an
"add on image".

Stefan