(fwd) RE: building romimage for tyan s2850 mainboard [sagivy at 3vium.com]
stepan at openbios.org
Tue Sep 14 09:09:01 CEST 2004
1) Please Cc the mailing list, there are many people who might help you
quicker/better than I do.
2) I don't understand your first question at all.
3) "invalid CMOS LB checksum" Means that the CMOS is not valid for
LinuxBIOS. Probably because you had a different firmware running
before LinuxBIOS in that machine. This error should go away
automatically after rebooting.
----- Forwarded message from Sagiv Yefet <sagivy at 3vium.com> -----
Date: Tue, 14 Sep 2004 16:41:46 +0200
From: "Sagiv Yefet" <sagivy at 3vium.com>
To: "Stefan Reinauer" <stepan at openbios.org>
Subject: RE: building romimage for tyan s2850 mainboard
I comment out the:
#dir /drivers/ati/ragexl -- video
which pci line in the southbridge it relate to?
southbridge amd/amd8111 "amd8111" link 0
pci 0:1.0 on
pci 0:1.1 on
pci 0:1.2 on
pci 0:1.3 on
pci 0:1.5 off
pci 0:1.6 off
pci 1:0.0 on
pci 1:0.1 on
pci 1:0.2 off
pci 1:1.0 off
what is this ERROR means ?
invalid CMOS LB checksum
From: Stefan Reinauer [mailto:stepan at openbios.org]
Sent: Tuesday, September 14, 2004 12:57 PM
To: Sagiv Yefet
Cc: linuxbios at clustermatic.org
Subject: Re: building romimage for tyan s2850 mainboard
* Sagiv Yefet <sagivy at 3vium.com> [040914 12:43]:
> Thanks, it worked.
> There are 2 errors:
> 1. ERROR - could not find PCI 1:03.0, using defaults
This looks like an error in the mptable creation, but I am not
sure without the context here.
> 2. ERROR: PNP: 002e.b 70 not allocated
> in Config.lb: 002e.b = HW monitor
No idea. I always kind of guessed when fiddling with PnP configuration.
> what does it means?
Can anyone on the list give some details here?
----- End forwarded message -----
More information about the coreboot