[LinuxBIOS] RE: Tyan 2850 video output
YhLu at tyan.com
Tue Apr 12 23:21:34 CEST 2005
did you get the atix.rom using dd?
> -----Original Message-----
> From: Alex [mailto:alex301 at bezeqint.net]
> Sent: Tuesday, April 12, 2005 2:59 PM
> To: YhLu
> Cc: linuxbios at clustermatic.org
> Subject: Re: Tyan 2850 video output
> Hi YhLu,
> The binary image you sent me works fine.
> Would you please help me to build LinuxBIOS properly?
> I got the latest development tree (thru tla tool).
> I tried to compile it - it failed with a segment overlap error.
> So I changed the LOG_LEVEL from 8 to 7.
> Also I set the ROM_SIZE to 524288 instead of 475136.
> The last thing I changed - was using the r8169.zelf
> (etherboot 5.2.6) instead of tg3 one.
> In etherboot I've set direct_vga and keyboard (I also
> experimented with some other options afterwards)
> I built the linuxbios.rom and burned it onto the chip. It
> works fine, prints the output to the RS232 console and
> DOESN'T print anything on the screen.
> (CONFIG_OPTION_ROM_RUN and CONFIG_VGA_CONSOLE are both set to 1)
> Appreciate your help,
> PS Should I use FILO support in etherboot? I tried -
> compilation failed...
More information about the coreboot