[LinuxBIOS] RE: LinuxBIOS Digest, Vol 6, Issue 31
Narahari, Narasimhaiah (IE10)
Narahari.Narasimhaiah at honeywell.com
Mon Aug 22 07:40:16 CEST 2005
Hi,
Did Any body face problems using nt-loader to boot Windows 2K?
With regards,
narahari
-----Original Message-----
From: linuxbios-bounces at openbios.org [mailto:linuxbios-bounces at openbios.org]
On Behalf Of linuxbios-request at openbios.org
Sent: Saturday, August 20, 2005 12:11 PM
To: linuxbios at openbios.org
Subject: LinuxBIOS Digest, Vol 6, Issue 31
Send LinuxBIOS mailing list submissions to
linuxbios at openbios.org
To subscribe or unsubscribe via the World Wide Web, visit
http://www.openbios.org/mailman/listinfo/linuxbios
or, via email, send a message with subject or body 'help' to
linuxbios-request at openbios.org
You can reach the person managing the list at
linuxbios-owner at openbios.org
When replying, please edit your Subject line so it is more specific than
"Re: Contents of LinuxBIOS digest..."
Today's Topics:
1. RE: newbie question of lb (Edwin Morales)
2. Re: Using lilo (Michal Szwaczko)
3. Re: newbie question of lb (Stefan Reinauer)
4. Re: newbie question of lb (Hamish Guthrie)
5. RE: newbie question of lb (Edwin Morales)
6. Re: Using lilo (Peter Stuge)
7. Re: Using lilo (Adam Sulmicki)
8. Re: Using lilo (Richard Smith)
9. Re: newbie question of lb (yhlu)
10. can an Athlon64 work on a Tyan Tomcat K8S (S2850 G2N) board?
(Miernik)
----------------------------------------------------------------------
Message: 1
Date: Fri, 19 Aug 2005 12:08:07 -0700
From: "Edwin Morales" <Morales at appro.com>
Subject: RE: [LinuxBIOS] newbie question of lb
To: <hamish at prodigi.ch>
Cc: linuxbios at openbios.org
Message-ID: <4B21D6C08BC8BA4A9530E43C980E58B01C35E1 at hawk.appro.com>
Content-Type: text/plain; charset="us-ascii"
well it's looking for that file, so how is that built......
Regards,
--------
// Ed
-----Original Message-----
From: linuxbios-bounces at openbios.org
[mailto:linuxbios-bounces at openbios.org] On Behalf Of Hamish Guthrie
Sent: Friday, August 19, 2005 2:05 PM
To: Edwin Morales
Cc: linuxbios at openbios.org
Subject: Re: [LinuxBIOS] newbie question of lb
So what???????????? --- there is not enough detail to even think about
debugging
Edwin Morales wrote:
> just following the lb manual on amd64 .
>
> when building the actual .rom file I get
> ...'payloads/tg3--filo_hda2_vga.zelf'
>
>
> regards,
> --------
> // ed
>
>
>
> -----Original Message-----
> From: linuxbios-bounces at openbios.org
> [mailto:linuxbios-bounces at openbios.org] On Behalf Of Stefan Reinauer
> Sent: Friday, August 19, 2005 11:33 AM
> To: Edwin Morales
> Cc: linuxbios at openbios.org
> Subject: Re: [LinuxBIOS] newbie question of lb
>
> * Edwin Morales <Morales at appro.com> [050819 20:18]:
>
>>hi all,
>>
>>new to linuxbios and just have some basic build questions.
>>
>>
>>
>>- how to care of the payload build error
>
>
> what build error?
>
>
>>- whether it be for etherboot or filo
>
>
> What's your question?
>
>
>>any quick tips are appreciated, anything but rtfm
>
>
> try to be a bit more elaborate ;-)
>
> http://www.catb.org/~esr/faqs/smart-questions.html#beprecise
> http://www.catb.org/~esr/faqs/smart-questions.html#writewell
>
> Stefan
>
>
>
--
LinuxBIOS mailing list
LinuxBIOS at openbios.org
http://www.openbios.org/mailman/listinfo/linuxbios
------------------------------
Message: 2
Date: Fri, 19 Aug 2005 21:08:06 +0200
From: Michal Szwaczko <mikey at wirelabs.net>
Subject: Re: [LinuxBIOS] Using lilo
To: Peter Stuge <stuge-linuxbios at cdy.org>
Cc: linuxbios at openbios.org
Message-ID: <20050819190806.GA10773 at tokyo>
Content-Type: text/plain; charset=iso-8859-2
On Fri, Aug 19, 2005 at 09:04:37PM +0200, Peter Stuge wrote:
> Call me conservative, but I use LILO everywhere. GRUB has caused me
> nothing but trouble while LILO has worked flawlessly since that day
> many years ago when I first started using it.
GRUB is much more flexible, and - if you read up a lot - it's easy.
I'd not say a word to you 2 years ago, because I was just that conservative
and trusted lilo. Seems, the only hurdle was prejudice and wrong mindset
about GRUB. Since then, I use GRUB exclusively. So, maybe you should give it
a shot one more time.
Regards,
--
[ .O. | Micha³ 'Mikey' Szwaczko | GPG Key#:0x653CBD53 ]
[ ..O | Developer/Troubleshooter | GNU Generation Now! ]
[ OOO | MSDOS is not dead. It just smells that way. ]
------------------------------
Message: 3
Date: Fri, 19 Aug 2005 21:13:36 +0200
From: Stefan Reinauer <stepan at openbios.org>
Subject: Re: [LinuxBIOS] newbie question of lb
To: Edwin Morales <Morales at appro.com>
Cc: linuxbios at openbios.org
Message-ID: <20050819191336.GA24333 at openbios.org>
Content-Type: text/plain; charset=us-ascii
* Edwin Morales <Morales at appro.com> [050819 21:08]:
> well it's looking for that file, so how is that built......
>
> > when building the actual .rom file I get
> > ...'payloads/tg3--filo_hda2_vga.zelf'
misleading, i read you got this file already..
compile etherboot from etherboot.org, and be sure to read the
configuration files and the documentation..
Stefan
------------------------------
Message: 4
Date: Fri, 19 Aug 2005 23:20:42 +0200
From: Hamish Guthrie <hamish at prodigi.ch>
Subject: Re: [LinuxBIOS] newbie question of lb
To: hamish at prodigi.ch
Cc: linuxbios at openbios.org, Edwin Morales <Morales at appro.com>
Message-ID: <43064D2A.9070107 at prodigi.ch>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
I am not sure if my previous post just failed to hit the net or what,
but, to re-iterate!!!
Hi Edwin,
I am sending you a quotation from a very good member of the open source
community - I do not want to detract from your question, at all, but
some of Marty's suggestions are good value for money.
I quote my friend Marty Connor
"You need to do a better job asking for help. You provide very little
in the way of information, and then you literally beg for help.
If you are having trouble with a project, then at least demonstrate that
you have read (or attempted to read) the documentation. There is also a
mailing list for help specifically with that software, if you can't
figure out the documentation or examples.
Also, in debugging, you should attempt to create simple test cases, and
when they fail, send input, output, and what you thought should happen
to the appropriate list for analysis. Otherwise, all we can do is guess
what might be happening.
I want to encourage you to proceed, but I also want to strongly suggest
that if you want help, you need to show that the time of the people
trying to help you is not wasted. You can do this by showing that
progress you have made, by producing output, and explaining in more
detail what you did.
If your English skills are a problem, please find a friend who has
better skills, and have them help you, in exchange for help with
something they need help with.
I hope you succeed, but even more I hope that in this process you
develop better debugging skills, and improve your methods of asking for
help."
Marty said it all. I think his advice is really good, and if you really
want help, follow the above steps.
Hamish
Hamish Guthrie wrote:
> So what???????????? --- there is not enough detail to even think about
> debugging
>
>
> Edwin Morales wrote:
>
>> just following the lb manual on amd64 .
>>
>> when building the actual .rom file I get
>> ...'payloads/tg3--filo_hda2_vga.zelf'
>>
>>
>> regards,
>> --------
>> // ed
>>
>>
>>
>> -----Original Message-----
>> From: linuxbios-bounces at openbios.org
>> [mailto:linuxbios-bounces at openbios.org] On Behalf Of Stefan Reinauer
>> Sent: Friday, August 19, 2005 11:33 AM
>> To: Edwin Morales
>> Cc: linuxbios at openbios.org
>> Subject: Re: [LinuxBIOS] newbie question of lb
>>
>> * Edwin Morales <Morales at appro.com> [050819 20:18]:
>>
>>> hi all,
>>>
>>> new to linuxbios and just have some basic build questions.
>>>
>>>
>>>
>>> - how to care of the payload build error
>>
>>
>>
>> what build error?
>>
>>
>>> - whether it be for etherboot or filo
>>
>>
>>
>> What's your question?
>>
>>
>>> any quick tips are appreciated, anything but rtfm
>>
>>
>>
>> try to be a bit more elaborate ;-)
>>
>> http://www.catb.org/~esr/faqs/smart-questions.html#beprecise
>> http://www.catb.org/~esr/faqs/smart-questions.html#writewell
>>
>> Stefan
>>
>>
>>
>
------------------------------
Message: 5
Date: Fri, 19 Aug 2005 12:33:54 -0700
From: "Edwin Morales" <Morales at appro.com>
Subject: RE: [LinuxBIOS] newbie question of lb
To: "Stefan Reinauer" <stepan at openbios.org>
Cc: linuxbios at openbios.org
Message-ID: <4B21D6C08BC8BA4A9530E43C980E58B01C35E4 at hawk.appro.com>
Content-Type: text/plain; charset="us-ascii"
sorry for the misleading information, my 'question asking skills' needs
much improvement
i'll check out etherboot.org
Regards,
--------
// Ed
-----Original Message-----
From: Stefan Reinauer [mailto:stepan at openbios.org]
Sent: Friday, August 19, 2005 12:14 PM
To: Edwin Morales
Cc: linuxbios at openbios.org
Subject: Re: [LinuxBIOS] newbie question of lb
* Edwin Morales <Morales at appro.com> [050819 21:08]:
> well it's looking for that file, so how is that built......
>
> > when building the actual .rom file I get
> > ...'payloads/tg3--filo_hda2_vga.zelf'
misleading, i read you got this file already..
compile etherboot from etherboot.org, and be sure to read the
configuration files and the documentation..
Stefan
------------------------------
Message: 6
Date: Fri, 19 Aug 2005 22:22:42 +0200
From: Peter Stuge <stuge-linuxbios at cdy.org>
Subject: Re: [LinuxBIOS] Using lilo
To: linuxbios at openbios.org
Message-ID: <20050819202242.3782.qmail at cdy.org>
Content-Type: text/plain; charset=us-ascii
On Fri, Aug 19, 2005 at 09:08:06PM +0200, Michal Szwaczko wrote:
> GRUB is much more flexible, and - if you read up a lot - it's easy.
I have had it set up on a couple of different systems and I think one
customer still has it, and configuration isn't the problem, while I
think it's totally stupid to invent a new naming scheme where a
common one already exists I don't have a problem adapting to it, but
my issues have been with reliability.
> I'd not say a word to you 2 years ago, because I was just that
> conservative and trusted lilo. Seems, the only hurdle was prejudice
> and wrong mindset about GRUB. Since then, I use GRUB exclusively.
I've tried it, so strike prejudice, but wrong mindset I'll admit to.
:)
The problem I had with reliability came from the fact that GRUB stage
1 loads stage 1.5 from fs, and if that fs got corrupted no OS could
be booted at all. I had to replace GRUB with MBR from DOS6 over the
phone with one person.
> So, maybe you should give it a shot one more time.
Some time, I surely will.
//Peter
------------------------------
Message: 7
Date: Fri, 19 Aug 2005 16:29:07 -0400 (EDT)
From: Adam Sulmicki <adam at cfar.umd.edu>
Subject: Re: [LinuxBIOS] Using lilo
To: Richard Smith <smithbone at gmail.com>
Cc: LinuxBIOS <linuxbios at openbios.org>
Message-ID: <Pine.BSF.4.62.0508191627560.13266 at www.missl.cs.umd.edu>
Content-Type: TEXT/PLAIN; charset=US-ASCII; format=flowed
>>> How do I use LILO to boot windows 2k?
>>
>> The usual way is to use either NTLDR or grub. Lilo is obsolete.
>>
>
> IIRC I don't think grub works under the Bochs copy in LinuxBios but
> its been awhile. Adam?
looking at :
http://www.usenix.org/events/usenix03/tech/freenix03/agnew/agnew_html/
seems it was grub, but it mentions lilo would work too.
------------------------------
Message: 8
Date: Fri, 19 Aug 2005 15:50:13 -0500
From: Richard Smith <smithbone at gmail.com>
Subject: Re: [LinuxBIOS] Using lilo
To: Adam Sulmicki <adam at cfar.umd.edu>
Cc: LinuxBIOS <linuxbios at openbios.org>
Message-ID: <8a0c36780508191350644c1101 at mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1
> looking at :
>
> http://www.usenix.org/events/usenix03/tech/freenix03/agnew/agnew_html/
>
> seems it was grub, but it mentions lilo would work too.
Ah.. Ok. I've got my wires crossed then. Thinking on it a bit more I
believe its tinybios for the STPC that has the issue with grub.
--
Richard A. Smith
------------------------------
Message: 9
Date: Fri, 19 Aug 2005 15:46:15 -0700
From: yhlu <yinghailu at gmail.com>
Subject: Re: [LinuxBIOS] newbie question of lb
To: Edwin Morales <Morales at appro.com>
Cc: linuxbios at openbios.org
Message-ID: <2ea3fae105081915465681c0e8 at mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1
http://www.linuxbios.org/index.php/Etherboot
YH
On 8/19/05, Edwin Morales <Morales at appro.com> wrote:
> sorry for the misleading information, my 'question asking skills' needs
> much improvement
>
> i'll check out etherboot.org
>
> Regards,
> --------
> // Ed
>
>
>
> -----Original Message-----
> From: Stefan Reinauer [mailto:stepan at openbios.org]
> Sent: Friday, August 19, 2005 12:14 PM
> To: Edwin Morales
> Cc: linuxbios at openbios.org
> Subject: Re: [LinuxBIOS] newbie question of lb
>
> * Edwin Morales <Morales at appro.com> [050819 21:08]:
> > well it's looking for that file, so how is that built......
> >
> > > when building the actual .rom file I get
> > > ...'payloads/tg3--filo_hda2_vga.zelf'
>
> misleading, i read you got this file already..
>
> compile etherboot from etherboot.org, and be sure to read the
> configuration files and the documentation..
>
> Stefan
>
>
>
>
> --
> LinuxBIOS mailing list
> LinuxBIOS at openbios.org
> http://www.openbios.org/mailman/listinfo/linuxbios
>
------------------------------
Message: 10
Date: Sat, 20 Aug 2005 08:17:35 +0200
From: Miernik <miernik at ffii.org>
Subject: [LinuxBIOS] can an Athlon64 work on a Tyan Tomcat K8S (S2850
G2N) board?
To: linuxbios at openbios.org
Message-ID: <20050820061735.3750.2.NOFFLE at localhost.localdomain.local>
Will Athlon64 CPUs work on a Tyan Tomcat K8S (S2850 G2N) motherboard and
will LinuxBIOS work in that configuration?
--
Miernik _________________________ xmpp:miernik at amessage.info
___________________/_______________________/ mailto:miernik at ffii.org
Protect Europe from a legal disaster. Petition against software patents
http://www.noepatents.org/index_html?LANG=en
------------------------------
_______________________________________________
LinuxBIOS mailing list
LinuxBIOS at openbios.org
http://www.openbios.org/mailman/listinfo/linuxbios
End of LinuxBIOS Digest, Vol 6, Issue 31
****************************************
More information about the coreboot
mailing list