[LinuxBIOS] bus 0 dev 0 and fidvid change
yinghai.lu at amd.com
Fri Dec 2 01:59:06 CET 2005
Please check the issue 41, I make K8 MB can be compiled, and It include
bus0/dev0 and fidvid change enhancement
Default is 1, and if it is 6, then amd8131 will be from 6, also
if it is 0, will assume ht chain only have one HT device...
Default is 0x20 --- mean do not use that, if it is 0, the
amd8111 will be dev0
Default is 1, so if HT_CHAIN_UNITID_BASE!=1, will only offset
unitid of SB CHAIN.
Deault is 0, if it is 1, will put sb chain on bus 0, even for
S2885 sb ht is on link2, it will put on bus0.
K8_SET_FIDVID in cache_as_ram_auto.c or auto.c
Fidvid change to sync the fid on 4 way or more system with different cpu
Put following sequence in your cache_as_ram_auto.c after ht is set.
please check init_cpus.c and fidvid.c and amd8111_early_ctrl.c for
More information about the coreboot