speaker beeper

[Adam Talbot]

-Stefan
Can i set my baud rate in the config, or do i need to go change it in the
code?
-Adam
----- Original Message ----- 
From: "Stefan Reinauer" <stepan at openbios.org>
To: "Adam Talbot" <talbotx at comcast.net>
Cc: "Ronald G. Minnich" <rminnich at lanl.gov>; <Linuxbios at clustermatic.org>
Sent: Thursday, January 13, 2005 10:42 AM
Subject: Re: speaker beeper


> * Adam Talbot <talbotx at comcast.net> [050113 17:32]:
> > -Ron
> > Sorry about that, have not even looked at vga; yes, screen=console.
> > As far as the output i see in minicom...
> > ".. ....... .. .. TÜ .¿.Ü.ü.  . ..  . .. ... Tü. .. .. .  .  ...û. .  .
..
> > .. .. ."
> > Hope that means something to you.
>
> Have you tried setting it to half or double baud rate?
>
> Stefan
>
>