Running with VGA

[YhLu]

It seems after if after cpu init do the onboard vga init, it will work.

The CPU init only do the init ECC and clear that after 1M. ... Werid! And it
is not wiped out after power off.


YH

-----Original Message-----
From: Li-Ta Lo [mailto:ollie at lanl.gov] 
Sent: Thursday, January 13, 2005 3:15 PM
To: YhLu
Cc: Sagiv Yefet; LinuxBIOS
Subject: RE: Running with VGA

On Thu, 2005-01-13 at 16:23, YhLu wrote:
> S2892 has onboard atirage xl
> S2895 has no onboard.
> 

With exactly the same chip and BIOS? Then probably the order
of calling device::init() does matter.

Ollie

> -----Original Message-----
> From: Li-Ta Lo [mailto:ollie at lanl.gov] 
> Sent: Thursday, January 13, 2005 3:10 PM
> To: YhLu
> Cc: Sagiv Yefet; LinuxBIOS
> Subject: RE: Running with VGA
> 
> On Thu, 2005-01-13 at 15:45, YhLu wrote:
> > No, no problem.
> > 
> > Same addon card (ati rage xl) (pci) on S2895 works well.
> > 
> 
> I am confused. Are you using S2895 or S2892? And is the rage xl
> on board or as an addon card?
> 
> Ollie
>