[LinuxBIOS] Tyan S2895 Mptable
yhlu
yinghailu at gmail.com
Thu Jun 9 20:33:33 CEST 2005
No connector for that.
YH
On 6/9/05, Ken Fuchs <kfuchs at winternet.com> wrote:
> > On 6/9/05, Stephen.Kimball at bench.com <Stephen.Kimball at bench.com> wrote:
> > > The Tyan/s2895 mptable.c is missing two entries for SATA. If the
> > > Config.lb file turns the SATA devices on the second CK804, this
> > > could be a problem. Ethernet is the only device in the mptable
> > > for the second CK804.
>
> Yh Lu wrote:
>
> > the sata in second CK804 is disabled in MB Config.lb, So don't need
> > that.
>
> I think that Stephen has already clearly indicated that there is no
> problem when SATA for the second CK8-04 is disabled.
>
> Does the Tyan S2885 hardware (with COTS BIOS) support SATA on the
> second CK8-04? If so, the mptable should have the entries required to
> support SATA on the second CK8-04.
>
> Sincerely,
>
> Ken Fuchs <kfuchs at winternet.com>
>
> _______________________________________________
> LinuxBIOS mailing list
> LinuxBIOS at openbios.org
> http://www.openbios.org/mailman/listinfo/linuxbios
>
More information about the coreboot
mailing list