[LinuxBIOS] Tyan S2895 Mptable

Stephen.Kimball at bench.com Stephen.Kimball at bench.com
Thu Jun 9 20:34:15 CEST 2005

That's what I said ... it's disabled in the MB Config.lb, but the hardware is still there.  It's only two lines in the mptable.c.  Do you expect s2895 users to not need the extra 4 SATA ports?  Why not fix it?  I'm sure you know how to fix it.  

If I see something that could be improved in the CK804 code, what should I do?  So far all my suggestions have been dismissed. 


-----Original Message-----
From: yhlu [mailto:yinghailu at gmail.com] 
Sent: Thursday, June 09, 2005 1:44 PM
To: Kimball, Stephen
Cc: linuxbios at openbios.org
Subject: Re: [LinuxBIOS] Tyan S2895 Mptable

the sata in second CK804 is disabled in MB Config.lb, So don't need that.


On 6/9/05, Stephen.Kimball at bench.com <Stephen.Kimball at bench.com> wrote:
> The Tyan/s2895 mptable.c is missing two entries for SATA. If the Config.lb file turns the SATA devices on the second CK804, this could be a problem.
> Ethernet is the only device in the mptable for the second CK804.
> Steve
> _______________________________________________
> LinuxBIOS mailing list
> LinuxBIOS at openbios.org
> http://www.openbios.org/mailman/listinfo/linuxbios

More information about the coreboot mailing list