[LinuxBIOS] Merge complete....
YhLu
YhLu at tyan.com
Thu Jun 23 03:34:03 CEST 2005
1. if not optimize the link in auto.c stage, and let hypertranport.c do the
optimization, the hard_reset from reset_bus can works....
2. if optimize the link in auto.c and hard_reset will be not called, and if
call hard_reset from debug device....it works well.
3. if optimize the link in auto.c and reset freq to high value in
hypertransport.c, the hard_reset from reset_bus will hang....
YH
> -----Original Message-----
> From: YhLu
> Sent: Wednesday, June 22, 2005 5:37 PM
> To: ebiederman at lnxi.com
> Cc: 'LinuxBIOS'
> Subject: RE: [LinuxBIOS] Merge complete....
>
> ck804 is using cf9 to do reset, ......may be i lost the
> control of that port.
>
> YH
>
> > -----Original Message-----
> > From: ebiederman at lnxi.com [mailto:ebiederman at lnxi.com]
> > Sent: Wednesday, June 22, 2005 5:29 PM
> > To: YhLu
> > Cc: 'LinuxBIOS'
> > Subject: Re: [LinuxBIOS] Merge complete....
> >
> > YhLu <YhLu at tyan.com> writes:
> >
> > > the code reset_bus and scan_bus seem quite neat.
> > >
> > > but do one simutation, it doesn't work.
> > >
> > > I set ht frq to 800Mhz in auto.c
> > > and reset that in hypertransport.c to 1GHz.
> > >
> > > it hangs after print out "Reseting board..."
> >
> > And the nice thing you get at most one reset of the board
> everything
> > will be setup and tuned first.
> >
> > > my hard_reset for ck804 doesn't work?
> > > hard_reset is suposed to work, because i can do restart and
> > > hardwaremain already call that......
> >
> > Sounds like that is the problem. Quite possibly there is a
> bus number
> > change somewhere messing things up.
> >
> > The other possibility is that there is some tuning problem and the
> > board does not come back from the reset.
> >
> > Eric
> >
>
> _______________________________________________
> LinuxBIOS mailing list
> LinuxBIOS at openbios.org
> http://www.openbios.org/mailman/listinfo/linuxbios
>
More information about the coreboot
mailing list