[LinuxBIOS] Section Overlaps & Offset miscalculation

[Stephen.Kimball at bench.com]

What motherboard are you using?

The first thing to check is the ROMSTRAP table.

The CK804 may not allow the board to come out of reset if the ROMSTRAP
is not in the proper location.

I think it's at 0xFFFFFFE0 defined in ids.inc and it points to
"2BIGDOGS" or 0x2B16D065.

 

Steve

 

 

-----Original Message-----
From: linuxbios-bounces at openbios.org
[mailto:linuxbios-bounces at openbios.org] On Behalf Of San Mehat
Sent: Monday, September 12, 2005 11:22 PM
To: linuxbios at openbios.org
Subject: [LinuxBIOS] Section Overlaps & Offset miscalculation

 

Greetings,

I'm currently trying to build a ck804 based amd bios and am having the
following issue:


/usr/bin/ld: section .reset [fffdfff0 -> fffdffff] overlaps section .rom
[fffd858b -> fffe263f]

When i increase 'ROM_IMAGE_SIZE' from 0x10000 to 0x20000 the problem
goes away, however it looks like the offsets are being incorrectly
computed
(the reset vector jump goes off into la-la land).

Any ideas?..

thanks
-san

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20050913/0315f4b9/attachment.html>