[LinuxBIOS] New Target for LinuxBios MB1030 / 3036
Christian Sühs
chris at suehsi.de
Fri Apr 21 18:47:41 CEST 2006
Stefan Reinauer schrieb:
> * Christian Sühs <chris at suehsi.de> [060421 15:27]:
>
>>>PCI: 00:13.0 init
>>>Devices initialized
>>>Copying IRQ routing tables to 0xf0000...done.
>>>Verifing copy of IRQ routing tables at 0xf0000...failed
>>
>>What could be a reason for that?
>
>
> CONFIG_COMPRESS is enabled. PIRQ tables are obsolete when you use ACPI,
> so if possible, go ACPI.
>
Jup ;)
but now it works :D
I don't know, what I have made wrong or what I have changed. It seems
that false filo settings have made the trouble.
However, the board starts with eaglelion/5bcm target.
Ok, now I need the best way to get vga working. Any ideas?
There is a Cyberpro 5000 on the board, normaly the vgabios is included
in the factory bios. I think the chip is on the pci bus.
Could I try the emulator to load the vgabios?
chris
More information about the coreboot
mailing list