[LinuxBIOS] MB1030 / 3036 I like 13 :D

[Richard Smith]

On 4/27/06, Christian Sühs <chris at suehsi.de> wrote:

> > To test you can just change line 36 in GX setup to be:
> >         .long   BC_XMAP_2, 0xb0000000
> >
>
> Well, I see. You want to enable the PCI accessable, too.
>
> Should be 1011 = b

Right.  I wasn't sure if it needed that but it sounds reasonable.  The
cache bit may also by some thing to play with.  Actually what you need
to do is boot with factory BIOS and read back the settings to see what
they have.

> but what about the other ranges.

There shouldn't be much of a problem with setting them all.  I was
just picking a starting point.

It would be be a good idea if you just enabled them one-by-one so that
we know what ranges it _really_ needs.  Perhpas we can make them on by
default.

> 76 54 32 10
> where are the first 4 bits located? Right or Left?

Bit 31 is the left most bit and Bit 0 is the right most.

0x76543210 would be:

0111 0110 0101 0100 0011 0010 0001 0000

--
Richard A. Smith