[LinuxBIOS] MB1030 / 3036 VGA comes up :D
Christian Sühs
chris at suehsi.de
Sat Apr 29 23:36:12 CEST 2006
There is a little question for me,
is this a normal output?
Why is the run_bios_int called three times?
Remember, on LB I have three calls, too.
What is done after these calls.
It seems that there are no differences between the second and the third one.
There is a ip (initial point) flag for testbios. Is there someting else
for the inTree one.
Is testbios faster with given ip.
chris
>
> QLC-> ./testbios --abseg /dev/mem -s 32768 aw512n.bin
> running file aw512n.bin
> No base specified. defaulting to 0xc0000
> No initial code segment specified. defaulting to 0xc000
> No initial instruction pointer specified. defaulting to 0x0003
> updating int vector 0x10
> updating int vector 0x10
> updating int vector 0x42
> updating int vector 0x42
> updating int vector 0x43
> updating int vector 0x43
> updating int vector 0x1f
> updating int vector 0x1f
> updating int vector 0x1d
> updating int vector 0x1d
> updating int vector 0x1d
> updating int vector 0x1d
> updating int vector 0x10
> updating int vector 0x10
> updating int vector 0x10
> int10 vector at c41b4
> updating int vector 0x10
> updating int vector 0x10
> updating int vector 0x10
> updating int vector 0x10
> updating int vector 0x10
> updating int vector 0x10
> run_bios_int: INT 10 CS:IP = c000:41b4
> updating int vector 0x43
> updating int vector 0x43
> updating int vector 0x43
> updating int vector 0x10
> updating int vector 0x10
> updating int vector 0x10
> int10 vector at c41b4
> updating int vector 0x10
> updating int vector 0x10
> updating int vector 0x10
> updating int vector 0x10
> updating int vector 0x10
> updating int vector 0x10
> run_bios_int: INT 10 CS:IP = c000:41b4
> updating int vector 0x43
> updating int vector 0x43
> updating int vector 0x43
> updating int vector 0x10
> updating int vector 0x10
> updating int vector 0x10
> int10 vector at c41b4
> updating int vector 0x10
> updating int vector 0x10
> updating int vector 0x10
> updating int vector 0x10
> updating int vector 0x10
> updating int vector 0x10
> run_bios_int: INT 10 CS:IP = c000:41b4
> updating int vector 0x43
> updating int vector 0x43
> updating int vector 0x1d
> updating int vector 0x1d
> QLC->
More information about the coreboot
mailing list