[LinuxBIOS] GA-6BXC - first try.
Ronald G. Minnich
rminnich at lanl.gov
Tue Aug 1 00:39:46 CEST 2006
>> 5. ./buildtarget bitworks/ims
>> 6. cd bitworks/ims/ims
>> 7. make
>
> IMS uses a NSC pc87351 for the super IO.
>
> Make sure you change the SuperIO to match your board. Or you won't
> get any output.
>
> Remember that if it "works" all you are going to get is a dump of the
> SPD, some messages on copying and jumping to RAM and then it will
> crash. Everthing else is on the ToDo list. :)
>
>> 9. sudo ../../../util/flashrom/flashrom -w linuxbios.rom
>>
>> Calibrating delay loop... ok
>> No LinuxBIOS table found.
>> No EEPROM/flash device found.
I'm guessing the write enable did not happen.
you can'd ID flash without write cycles working.
ron
More information about the coreboot
mailing list