[LinuxBIOS] RD1-PL on EPIA-M10000 problem

[Stefan Reinauer]

* lists at actweb.info <lists at actweb.info> [060809 01:49]:
>  i have an EPIA-M m/board with an SST39SF020A bios chip, along with an
>  RD1-PL 2Mbit bios savour, are these both 2Mb chips? i have tried
>  writing the RD1 with a image file, but it always fails :( anyone any
>  pointers?
> 
> have so far tried to write image aprox 8 times, still with no luck :(
> this is the output from flashrom :-

Have you tried to write it and read it back?
I get the same error
> Enabling flash write on VT8235...tried to set 0x45 to 0x55 on VT8235 failed (WARNING ONLY)
ocassionally, but writing works fine. 

  Stefan


-- 
coresystems GmbH • Brahmsstr. 16 • D-79104 Freiburg i. Br.
      Tel.: +49 761 7668825 • Fax: +49 761 7664613
Email: info at coresystems.de  • http://www.coresystems.de/