[LinuxBIOS] Geode GX1 system IRQ handling
Jonathan Sturges
jsturges at speakeasy.net
Tue Aug 15 23:07:24 CEST 2006
Richard Smith wrote:
>> >
>> > Unless its compressed.
>> >
>> You mean, run getpir against the WinCE BIOS image? Please clarify what
>> you're saying.
>> I still can't use the WinCE BIOS to boot other OSes, so unless I'm
>> misunderstanding you, I don't think that'll work.
>
>
> Exactly. The $PIR was just a table. Ron's guessing that if they used
> PIR then its probably just the table hanging out in the ROM in which
> getpir will find it.
>
> you can also hd (or other hexeditor) the image file and look for
> occurances of $PIR. There may be more than one so you have to go
> further to verify its a PIR table.
>
Oh, sweet! I hope that is indeed the case. I'll peek at the ROM image
shortly.
Can getpir read from a file, such as a binary image of the WinCE BIOS?
thanks again,
Jonathan
More information about the coreboot
mailing list