[LinuxBIOS] Geode GX1 system IRQ handling
juergen127 at kreuzholzen.de
Wed Aug 16 14:50:01 CEST 2006
please use plain text, no HTML....
On Wednesday 16 August 2006 13:58, Jonathan Sturges wrote:
> PCI: No IRQ known for interrupt pin A of device 00:13.0. Please try
> using pci=biosirq.
> usb-ohci.c: found OHCI device with no IRQ assigned. check BIOS
> ...which basically means the entries for these devices in the IRQ map
> are either wrong, or missing. What's needed now is a way to determine
> those interrupts, and put them in the map. Did you have to go through
> a similar process on your board, and if so, can you detail what you
Yes, similar to my experience. I tried (no chance to read back any values due
to WinCE-Bootloader instead of BIOS) with this irq map and it works.
-------------- next part --------------
A non-text attachment was scrubbed...
Size: 3071 bytes
Desc: not available
More information about the coreboot