[LinuxBIOS] DK8-HTX Early Hang with HTX Card Intsalled

[mcqmcqmcq at fastmail.fm]

> You can use 2.6.19 later kernel and enable HT_IRQ in it. --- Eric worked
> it out, and I didn't have chance to test it.

Hey, 2.6.19.1 actually boots (better than 2.6.19)!  2.6.19.1
with HT_IRQ turned on yields:

sh-3.1# modprobe ib_ipath
PCI: No IRQ known for interrupt pin C of device 0000:40:01.0. Probably
buggy MP table.
mtrr: type mismatch for fd500000,100000 old: write-back new:
write-combining
ib_ipath 0000:40:01.0: mtrr_add()  WC for PIO bufs failed (-22)
ib_ipath 0000:40:01.0: infinipath0: Write combining not enabled (err
22): performance may be poor

Note that HT_IRQ removes the complaint (formerly right before
the mtrr complaints):

ipath_core 0000:40:01.0: infinipath0: irq is 0, BIOS error?  Interrupts
won't work

Further fun stuff to try?  I am your board monkey.

-mcq
-- 
  
  mcqmcqmcq at fastmail.fm

-- 
http://www.fastmail.fm - Same, same, but different