[LinuxBIOS] tyan s2881 - partial success (update)

[Lu, Yinghai]

Where is the driver module for MD, is it in initrd.img?

YH

-----Original Message-----
From: linuxbios-bounces at openbios.org
[mailto:linuxbios-bounces at openbios.org] On Behalf Of Ward Vandewege
Sent: Friday, January 06, 2006 12:46 PM
To: LinuxBIOS
Subject: Re: [LinuxBIOS] tyan s2881 - partial success (update)

On Fri, Jan 06, 2006 at 10:24:26AM -0800, Lu, Yinghai wrote:
> I'm thinking the way that you can use
> 1. use LinuxBIOS to boot tiny kernel
> 2. use RAID5 support in Tiny Kernel and kexec to boot the final
kernel.
> 
> I wonder if the SW RAID access in FILO is a problem....

I'm not sure why FILO would care. I now boot off (a drive of) a RAID1
partition, which is a perfectly normal drive partition as far as FILO is
concerned. When the kernel is loaded, it has the sw-raid drivers and
hence it
can deal with the RAID5 array. 

Ward.

--
Ward Vandewege <ward at fsf.org>
Free Software Foundation - Senior System Administrator

-- 
LinuxBIOS mailing list
LinuxBIOS at openbios.org
http://www.openbios.org/mailman/listinfo/linuxbios