[LinuxBIOS] Build issue for khepri target
Lu, Yinghai
yinghai.lu at amd.com
Fri Jul 14 18:19:33 CEST 2006
Did you connect serial console? You should get some sth from the serial
port.
YH
________________________________
From: Anil B G [mailto:bg.anil at gmail.com]
Sent: Friday, July 14, 2006 8:15 AM
To: Lu, Yinghai
Cc: linuxbios at linuxbios.org
Subject: Re: [LinuxBIOS] Build issue for khepri target
Hi,
Thanks for the help. I changed the option FALLBACK_SIZE=262144 in the
targets/newisys/khepri/Config.lb and I was able to build the khepri.rom
file of size 512K. Would be nice to document the same somewhere.
I also managed to try loading the same on a khepri board that I could
lay my hands on.
However the system did not boot . Is there a way to enable some beep()
or something similar early on to know that the
processor has started executing the LinuxBIOS code. I do not have a
scope or other hardware that I could use to probe.
There was some output on the serial but that from the service processor
that my khepri board has.
Any pointers?
Regards
Anil
On 7/12/06, Lu, Yinghai <yinghai.lu at amd.com> wrote:
Please change FALLBACK_SIZE in MB Config.lb <http://config.lb/> to
#default FALLBACK_SIZE=0x40000
YH
________________________________
From: linuxbios-bounces at linuxbios.org
[mailto:linuxbios-bounces at linuxbios.org ] On Behalf Of Anil B G
Sent: Wednesday, July 12, 2006 7:58 AM
To: linuxbios at linuxbios.org
Subject: [LinuxBIOS] Build issue for khepri target
Hi,
I am new to LinuxBIOS. I downloaded the latest snapshot of LinuxBIOSv2
and tried building it for a couple of boards (newisys/intel etc).
I was able to build it for intel but when I tried to build it for
newisys/khepri I got the following error:
gcc -o buildrom
/home/anil/LinuxBios/LinuxBIOSv2/util/buildrom/buildrom.c
./buildrom linuxbios.strip linuxbios.rom payload 0x20000 0x20000
payload (77000) + linuxbios (131072) size larger than ROM (131072) size!
make[1]: *** [linuxbios.rom] Error 1
make[1]: Leaving directory
`/home/anil/LinuxBios/LinuxBIOSv2/targets/newisys/khepri/khepri/fallback
'
make: *** [fallback/linuxbios.rom] Error 1
I disabled the fallback option and then was able to get the khepri.rom
whose size was 384K. I am using the FILO as the payload.
Is the size of 384K fine? Has any one used LinuxBIOSv2 on khepri? Would
appreciate any help.
Pls. let me know if any addl. info is reqd.
The gcc version is 3.4.3
Regards
Anil
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20060714/4ee5c420/attachment.html>
More information about the coreboot
mailing list