[LinuxBIOS] EPIA-MII 12000, almost there. ( newbie )

[Per Mellander]

On Tue, 13 Jun 2006 09:41:35 -0500, Richard Smith wrote

> Sounds like your rom size or location info is is wrong.  I don't see
> your config.lb posted anywhere in this thread.

It's a plain vanilla Config.lb that's generated by "./buildtarget via/epia-m". You'll
find it attached.

> What size is your flash?

256M

> 
> You can do a quick check by just pre-pending a 64k file of 0xffs
> rather than a video bios.  And see if it boots.

I'll try that today.

> I don't remember if  we ever patched the expansion rom code so that it
> verifies signatures before running the code. If not then it will crash
> when it runs the video bios but then you can just disable that option
> in your config and it should run.

Where can I find info about each option i.e which option affects the VGA init?

Thanks for your help,

Per


-------------- next part --------------
A non-text attachment was scrubbed...
Name: Config.lb
Type: application/octet-stream
Size: 1550 bytes
Desc: not available
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20060614/fe6b7a29/attachment.obj>