[LinuxBIOS] broadcom HT1000 SATA PHY initializing
JJia at Fortinet.com
Fri Mar 31 20:38:51 CEST 2006
I'm using LinuxBIOS to test it. (Standard system BIOS seems linked an
option rom to do the initialization and working fine).
----- Original Message -----
From: "Lu, Yinghai" <yinghai.lu at amd.com>
To: "Jia Jianwei" <JJia at Fortinet.com>; <linuxbios at linuxbios.org>
Sent: Thursday, March 30, 2006 6:08 PM
Subject: RE: [LinuxBIOS] broadcom HT1000 SATA PHY initializing
> System BIOS or LinuxBIOS?
> Did you base the code in the tree?
> -----Original Message-----
> From: linuxbios-bounces at linuxbios.org
> [mailto:linuxbios-bounces at linuxbios.org] On Behalf Of Jia Jianwei
> Sent: Thursday, March 30, 2006 12:36 PM
> To: linuxbios at linuxbios.org
> Subject: [LinuxBIOS] broadcom HT1000 SATA PHY initializing
> I'm porting BIOS on a AMD opteron system with broadcom HT2000 and HT1000
> chipset. I meet a problem when initilizing SATA device of HT1000. The
> PHY status(0x40)always return a disable status(04), whatever I did with
> PHY reset ( set 0x48 bit 0 and clear it ). Can anyone give me some
> Thanks in advance!
> Best Regards,
> *** Disclaimer: This message may contain privileged and/or confidential
> information. If you have received this e-mail in error or are not the
> intended recipient, you may not use, copy, disseminate or distribute it;
> do not open any attachments, delete it immediately from your system and
> notify the sender promptly by e-mail that you have done so. Thank you.
> linuxbios mailing list
> linuxbios at linuxbios.org
More information about the coreboot