[LinuxBIOS] USB Bootloader

[yhlu]

1. gcc version? you may try 4.0.2
2. UHCI? I didn't test that much.
3. don't not enable too much debug...

YH

On 11/2/06, jean raymond <jeanraymond19769earrond at hotmail.com> wrote:
> I have this config for FILO:
>
> #define AUTOBOOT_FILE "uda1:/bzImage root=/dev/sda2 console=tty0
> console=ttyS0,115200"
> #define AUTOBOOT_DELAY 20
> #define IDE_DISK 1
> #define USB_DISK 1
> #define FSYS_EXT2FS 1
> #define FSYS_FAT 1
> #define ELTORITO 1
> #define SUPPORT_PCI 1
> #define DEBUG_ALL 1
> #define DEBUG_LINUXBIOS 1
> #define DEBUG_PCI 1
> #define DEBUG_USB 1
> #define LINUX_LOADER 1
> #define PCI_CONFIG_1 1
>
>
>
>
> >From: Stefan Reinauer <stepan at coresystems.de>
> >To: jean raymond <jeanraymond19769earrond at hotmail.com>
> >CC: linuxbios at linuxbios.org
> >Subject: Re: [LinuxBIOS] USB Bootloader
> >Date: Thu, 2 Nov 2006 13:12:13 +0100
> >
> >* jean raymond <jeanraymond19769earrond at hotmail.com> [061102 12:39]:
> > > I'm using Etherboot version 5.4.2 from etherboot.org.
> > > I'm using LinuxBIOS version2-2394 and a i386 board.
> >
> >which one?
> >
> > > I suppose I have a bad config. So can you give me a config an example of
> > > config in order to boot on USB.
> >
> >It might just be a missing bit in the USB configuration of the board you
> >are using.
> >
> > > Thanks for your help!
> >
> >you're welcome.
> >
> >--
> >coresystems GmbH • Brahmsstr. 16 • D-79104 Freiburg i. Br.
> >       Tel.: +49 761 7668825 • Fax: +49 761 7664613
> >Email: info at coresystems.de  • http://www.coresystems.de/
> >
> >--
> >linuxbios mailing list
> >linuxbios at linuxbios.org
> >http://www.openbios.org/mailman/listinfo/linuxbios
>
> _________________________________________________________________
> Don't just search. Find. Check out the new MSN Search!
> http://search.msn.com/
>
>
>
>
> --
> linuxbios mailing list
> linuxbios at linuxbios.org
> http://www.openbios.org/mailman/listinfo/linuxbios
>
>